Woodpeckers | Rip thin strips faster and safer than ever with the ThinRip Guide! #woodpeckerstools #shorts @WoodpeckersLLC | Uploaded June 2024 | Updated October 2024, 1 hour ago.
Trapping those thin strips between your table saw blade and the rip fence can cause kickback. Also, tension release in the cut can cause binding and burning. It’s smarter to have the strip on the off cut side of your blade, but how do you keep the thickness consistent? Woodpeckers ThinRip Guide is the answer. The ThinRip Guide provides a perfectly safe stop on the off cut side of the blade that delivers the same sized strips over and over again as you move your fence closer to the blade.
The ThinRip Guide is engineered to work with almost everything from portable jobsite saws up to the largest cabinet saws. If the miter slot is 3/8” x 3/4” with a T-slot, it will fit. Depending on the brand saw you have, you can cut strips as thin as 1/32” and up to 1-1/4”.
The ThinRip Guide is machined from a solid billet of top-quality aluminum. At just under 4 pounds, it’s engineered to provide solid support, and look good doing it. All other components are made from corrosion resistant materials, giving you a tool that will do its job for generations of woodworkers to come.
You can find the ThinRip Guide on our website woodpeck.com or copy and paste the link below in your web browser!
woodpeck.com/thin-rip-guide.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=TRG-JAY-06-2024
Tools Used:
1️⃣ ThinRip Guide
SKU: TRG
#woodpeckerstools #woodworkingtools #toolsofthetrade #tablesaw #tablesawjigs #woodworkingtips #woodshop #igwoodworkingcommunity #woodworkingcommunity #satisfyingvideos #makersgonnamake #makersofinstagram #woodworkingskills #woodworkingprojects
Trapping those thin strips between your table saw blade and the rip fence can cause kickback. Also, tension release in the cut can cause binding and burning. It’s smarter to have the strip on the off cut side of your blade, but how do you keep the thickness consistent? Woodpeckers ThinRip Guide is the answer. The ThinRip Guide provides a perfectly safe stop on the off cut side of the blade that delivers the same sized strips over and over again as you move your fence closer to the blade.
The ThinRip Guide is engineered to work with almost everything from portable jobsite saws up to the largest cabinet saws. If the miter slot is 3/8” x 3/4” with a T-slot, it will fit. Depending on the brand saw you have, you can cut strips as thin as 1/32” and up to 1-1/4”.
The ThinRip Guide is machined from a solid billet of top-quality aluminum. At just under 4 pounds, it’s engineered to provide solid support, and look good doing it. All other components are made from corrosion resistant materials, giving you a tool that will do its job for generations of woodworkers to come.
You can find the ThinRip Guide on our website woodpeck.com or copy and paste the link below in your web browser!
woodpeck.com/thin-rip-guide.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=TRG-JAY-06-2024
Tools Used:
1️⃣ ThinRip Guide
SKU: TRG
#woodpeckerstools #woodworkingtools #toolsofthetrade #tablesaw #tablesawjigs #woodworkingtips #woodshop #igwoodworkingcommunity #woodworkingcommunity #satisfyingvideos #makersgonnamake #makersofinstagram #woodworkingskills #woodworkingprojects