Woodpeckers | Give your table saw a tune-up with Woodpeckers Saw Gauge! @WoodpeckersLLC | Uploaded August 2024 | Updated October 2024, 22 minutes ago.
Woodworkers spend hundreds or even thousands of dollars on a table saw then spend hundreds more on high quality saw blades and still get burn marks when doing rip cuts. Even getting accurate results with a miter gauge can be difficult when the blade alignment is off. In most cases this is the result of misalignment between the miter slot, fence and blade.
For a perfect cut, the saw blade and rip fence must be dead parallel to the left hand miter gauge slot.
The most reliable and accurate way to do this is with a dial indicator and tool that rides perfectly up and down the miter slot.
The Saw Gauge is engineered to expertly satisty this need. It’s the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8” wide like many older saws, 3/4” wide like most current models or even somewhat over-sized; this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. No tools, no adjustments, just instant alignment.
To learn more about the Saw Gauge or to order yours today, copy and paste the link below in your web browser!
woodpeck.com/woodpeckers-saw-gauge.html
Tools Used:
1️⃣ Saw Gauge
SKU: SG-WP
2️⃣ Saw Gauge - (no dial indicator)
SKU: SG-WP-ONLY
#woodpeckerstools #tablesaw #sawstop #woodworkingtools #woodshop #toolsofthetrade #woodworkersofinstagram #maker #makersgonnamake
Woodworkers spend hundreds or even thousands of dollars on a table saw then spend hundreds more on high quality saw blades and still get burn marks when doing rip cuts. Even getting accurate results with a miter gauge can be difficult when the blade alignment is off. In most cases this is the result of misalignment between the miter slot, fence and blade.
For a perfect cut, the saw blade and rip fence must be dead parallel to the left hand miter gauge slot.
The most reliable and accurate way to do this is with a dial indicator and tool that rides perfectly up and down the miter slot.
The Saw Gauge is engineered to expertly satisty this need. It’s the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8” wide like many older saws, 3/4” wide like most current models or even somewhat over-sized; this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. No tools, no adjustments, just instant alignment.
To learn more about the Saw Gauge or to order yours today, copy and paste the link below in your web browser!
woodpeck.com/woodpeckers-saw-gauge.html
Tools Used:
1️⃣ Saw Gauge
SKU: SG-WP
2️⃣ Saw Gauge - (no dial indicator)
SKU: SG-WP-ONLY
#woodpeckerstools #tablesaw #sawstop #woodworkingtools #woodshop #toolsofthetrade #woodworkersofinstagram #maker #makersgonnamake