Woodpeckers | 6-IN-1 Shop & Pocket Gauges… Precision Layout, Six Different Ways! @WoodpeckersLLC | Uploaded August 2024 | Updated October 2024, 2 hours ago.
🚨 6-IN-1 Shop & Pocket Gauges are now a PERMANENT PRODUCT ‼️ Reserve yours today!
Woodpeckers 6-IN-1 Gauges give you a physical reference for measurements to eliminate the errors that can crop up when reading scales. With a series of shoulders, pins and stops, you have several different ways to physically reference a set dimension. This handy device comes in two different sizes. For pocket-sized convenience, there’s the 6-in-1 Pocket Gauge and for increased capacity there’s the 6-in-1 Shop Gauge.
6️⃣ Different Ways to Deliver Layout Precision 🤯
1️⃣ Saw Blade & Router Bit Depth of Cut. With the feet on your table surface, the sliding block gives you a physical reference to set your saw blade or router bit.
2️⃣ Drill Bit Stop Collars. Turn the tool over and you’ll see a vee-block. Use that to cradle your drill bits while you set a stop collar.
3️⃣ Marking Gauge. Move the sliding block past the feet and you have a marking gauge.
There’s a notch to keep your pencil properly positioned.
4️⃣ Depth Gauge. Need to check a rabbet to make sure it’s deep enough? Use the flat end of the sliding block to measure from the feet down to the bottom of the rabbet.
5️⃣ Centering Gauge. Put the feet on opposite sides of a board and twist the gauge so both feet are firmly in contact with the board surface. The 1mm hole in the Base will be at the exact center of the board. Put a mechanical pencil in the hole and you can slide along the length, scribing the center perfectly.
6️⃣ Hole and Groove Depth Gauge. Last but not least, there’s a 1/8” diameter rod with a scale to read the depth of any hole or groove too small for the sliding block.
To learn more or to take advantage of introductory pricing, copy and paste the link below in your web browser!
woodpeck.com/6in1-shop-pocket-gauge.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=6-IN-1-JAY-08-2024
#woodworking #woodpeckerstools #woodworkingcommunity #woodworkingskills #woodworkingtools
🚨 6-IN-1 Shop & Pocket Gauges are now a PERMANENT PRODUCT ‼️ Reserve yours today!
Woodpeckers 6-IN-1 Gauges give you a physical reference for measurements to eliminate the errors that can crop up when reading scales. With a series of shoulders, pins and stops, you have several different ways to physically reference a set dimension. This handy device comes in two different sizes. For pocket-sized convenience, there’s the 6-in-1 Pocket Gauge and for increased capacity there’s the 6-in-1 Shop Gauge.
6️⃣ Different Ways to Deliver Layout Precision 🤯
1️⃣ Saw Blade & Router Bit Depth of Cut. With the feet on your table surface, the sliding block gives you a physical reference to set your saw blade or router bit.
2️⃣ Drill Bit Stop Collars. Turn the tool over and you’ll see a vee-block. Use that to cradle your drill bits while you set a stop collar.
3️⃣ Marking Gauge. Move the sliding block past the feet and you have a marking gauge.
There’s a notch to keep your pencil properly positioned.
4️⃣ Depth Gauge. Need to check a rabbet to make sure it’s deep enough? Use the flat end of the sliding block to measure from the feet down to the bottom of the rabbet.
5️⃣ Centering Gauge. Put the feet on opposite sides of a board and twist the gauge so both feet are firmly in contact with the board surface. The 1mm hole in the Base will be at the exact center of the board. Put a mechanical pencil in the hole and you can slide along the length, scribing the center perfectly.
6️⃣ Hole and Groove Depth Gauge. Last but not least, there’s a 1/8” diameter rod with a scale to read the depth of any hole or groove too small for the sliding block.
To learn more or to take advantage of introductory pricing, copy and paste the link below in your web browser!
woodpeck.com/6in1-shop-pocket-gauge.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=6-IN-1-JAY-08-2024
#woodworking #woodpeckerstools #woodworkingcommunity #woodworkingskills #woodworkingtools
