Replace the small heatsink on Amlogic CPU with a higher-performance cooler @ObengwareID
Replace the small heatsink on Amlogic CPU with a higher-performance cooler  @ObengwareID
Uploaded November 2025 | Updated November 2026, 1 day ago
Overcoming Overheating in Amlogic S905X: A Guide to Heatsink Replacement and Cooling Upgrades
00:00 1. Removing the chip heatsink.
01.49 2. Replacing the heatsink.
03:33 3. Add Fan, the best solution
The Amlogic S905X chip is a popular processor found in many Android TV Boxes and media center devices. While efficient, under heavy load or due to inadequate stock cooling design, the chip can become very hot, leading to performance throttling or even system instability.

Upgrading the cooling solution is an effective fix. We will discuss two main methods: replacing the heatsink (passive cooling) and adding a fan (active cooling).

1. Enhancing Passive Cooling: Replacing the Heatsink and thermal paste
A heatsink is a metal component that absorbs and dissipates heat from the chip into the surrounding air. Upgrading the stock heatsink can make a significant difference.

Preparation Tools and Materials
Replacement heatsink (larger, with more fins, or made of copper).
High-quality thermal paste or thermal pad.

Replacement Steps
Heat chip until 70 deg. or higher (load CPU)
Carefully peel off the old heatsink. If it is glued, gently twist it to separate it.
Clean the Chip.
Apply New Thermal Interface Material (TIM): Apply a small amount (rice-grain size) of new thermal paste to the center of the chip surface or place a new, properly sized thermal pad.
Install the New Heatsink: Affix the larger replacement heatsink onto the chip. Ensure the pressure is even for maximum contact between the heatsink and the chip.

Test and Close the Casing: Test your device before fully closing the casing. If the temperature is stable, close the casing. If the new heatsink is too large, you might need to modify or leave the top case cover open.

Active Cooling: Adding a Fan (Best solution)
Air circulation in small device spaces can be aided by a fan
Adding a fan provides stronger airflow and more effectively removes heat, especially if the stock or replacement heatsink is still insufficient.

Preparation Tools and Materials
Small DC fan (e.g., 30mm or 40mm size, typically 5V).

Fan Addition Steps
Determine the Mounting Location: The fan can be mounted inside the case, blowing air onto the heatsink (intake mode), or on top of the casing, pulling hot air out (exhaust mode).

Modify the Casing (If Necessary): If the fan is mounted on the casing, measure and cut a hole in the casing above or near the S905X chip. Ensure the hole is cut neatly so the fan can sit securely.

Fan Power:
A small fan can work from 12V down to 5V, or by using a step-down converter/module. Test whether the temperature drops to an ideal level. Install the fan permanently for device cooling

Note :
Normal/Safe Temperature: The Amlogic S905X processor operates at a normal temperature below 80°C (176°F).
Throttling Threshold: The processor begins to perform thermal throttling at temperatures above approximately 80°C to 85°C.
Throttling Mechanism: To protect the processor from damage due to excessive heat.

The goal of this video: To cool the processor during normal performance/operation.
Used as a small, power-efficient server, operating 24 hours a day.
Maintaining the processor temperature in the range of 50°C.
Heat reaches 70°C when compiling a program.
Replace the small heatsink on Amlogic CPU with a higher-performance coolerMouse cant click on Android TV change with GBoardMod Sonoff to Tasmota from 1 switch to 4 switchHow to replace a bicycle chain using a quick linkModul Charging  AC01 TP4056  Step Up voltage 5V DC other model HW 357 J5019ESP32 A fatal error occurred Failed to connect to ESP32 Wrong Boot ModeESP32 error rst 0x1 power on reset boot 0x13 spi fast flash bootSamsung washing machine spin slow squealing noiseSave file 4GB or bigger Android TV to microSD or Flash Drive exFATInstall terminate RJ45 connectors on Cat6 and Cat5 LAN cablesESP32 C6 Failed uploading error exit status 2 this chip esp32C6 not esp32Windows 11 25H2 24H2 IoT Enterprise Installation has failed No Internet
Obengplus com |

Replace the small heatsink on Amlogic CPU with a higher-performance cooler

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER