Uploaded September 2026 | Updated November 2026, 3 hours ago
RAKS DF-12 TK 12” dual voltage oscillating fan. This was one of the top portable finds from Cleanup Week 2026. It was absolutely trashed when I found it. Beyond caked in crud, completely locked up, the nylon oscillator driver cracked in pieces, cord gone, and missing the center badge. I wasn’t sure what it was going to turn out like, but it’s uncommon enough that I knew I had to try my best to clean it up. It came out better than I ever could have expected. I think the thick layer of debris on it actually preserved the finishes underneath. Dug through all my stash of spare motors and found a singular one with oscillator parts that I could harvest and modify slightly to work. Just had to file down the protrusion a tiny bit and it was perfect. Sometimes I wonder if it's worth holding on to all the spare stuff I keep, but it almost always pays off in the long run. I went through my stash and found a spare center badge that I thought suited ok (the openings kind of mimic the elongated pill shape of the buttons), then cut out a piece of blue vinyl to stick in the center to make it suit this particular fan a bit better, as the original center was kind of a bronzy brown color. I wanted to attempt adding a RAKS logo on it, but I’m a little pressed for time lately and couldn’t warrant that side quest right now. Overall couldn’t be more happy with it. The blades have some cracking in the center structure so actually running it will probably be sparse, but it also does run incredibly well after getting the motor freed up. Thankfully the blades only have some very minor small chipping around the edges otherwise, and most other parts are in pretty good shape.
RAKS DF-12 TK 12” dual voltage oscillating fan. This was one of the top portable finds from Cleanup Week 2026. It was absolutely trashed when I found it. Beyond caked in crud, completely locked up, the nylon oscillator driver cracked in pieces, cord gone, and missing the center badge. I wasn’t sure what it was going to turn out like, but it’s uncommon enough that I knew I had to try my best to clean it up. It came out better than I ever could have expected. I think the thick layer of debris on it actually preserved the finishes underneath. Dug through all my stash of spare motors and found a singular one with oscillator parts that I could harvest and modify slightly to work. Just had to file down the protrusion a tiny bit and it was perfect. Sometimes I wonder if it's worth holding on to all the spare stuff I keep, but it almost always pays off in the long run. I went through my stash and found a spare center badge that I thought suited ok (the openings kind of mimic the elongated pill shape of the buttons), then cut out a piece of blue vinyl to stick in the center to make it suit this particular fan a bit better, as the original center was kind of a bronzy brown color. I wanted to attempt adding a RAKS logo on it, but I’m a little pressed for time lately and couldn’t warrant that side quest right now. Overall couldn’t be more happy with it. The blades have some cracking in the center structure so actually running it will probably be sparse, but it also does run incredibly well after getting the motor freed up. Thankfully the blades only have some very minor small chipping around the edges otherwise, and most other parts are in pretty good shape.


![[CLOSED] VF&M 15,000 Subscriber Giveaway! Win A SAMARAN Fan From OXYGEN!
This giveaway is closed. Congratulations to our winner, Sean M. Thank you all for the support and for getting me here!
YouTube/Google has no affiliation with or liability in this giveaway. Oxygen Lighting acts only as a product sponsor and holds no further affiliation or liability.
Visit My Website: http://www.vintagefansandmore.com
The VF&M Blog: https://www.vintagefansandmore.com/blog
VF&M Merch: https://shop.spreadshirt.com/vintagefansandmore
Like VF&M on Facebook: https://www.facebook.com/vintagefansandmore
Follow me on Instagram: https://www.instagram.com/vfandm
Follow me on TikTok: https://www.tiktok.com/@vfandm
Follow me on Twitter: https://twitter.com/vfandm
Follow me on Pinterest: https://www.pinterest.com/vfansandmore
Add me on Snapchat: vfandm
Consider shopping my Amazon Recommendations to support my channel*: https://www.amazon.com/shop/vintagefansmore
#CeilingFan
*As an Amazon Associate I earn from qualifying purchases. [CLOSED] VF&M 15,000 Subscriber Giveaway! Win A SAMARAN Fan From OXYGEN!](https://i.ytimg.com/vi/hR0NHX1-ZH0/mqdefault.jpg)







