Uploaded April 2025 | Updated September 2026, 2 weeks ago
Polymkaer ABS, 250C, Goliath hot end, LDO 20mm wide extruder motor @48V, VZhextrudort OG with straight gears and brass bull gear, ValV-N-AtoR part cooling with WS7040 blower. Extruder hot end is cooled with an aquarium pump and chamber temp for this print was 59C.
Sub 7 min quality slice.
Speeds set at 500mms, 30-50K acceleration at 20SCV. PA 0.01 all features.
Standard benchy rules: .25 layer height, .5 line width, 3 bottom/top, 2 walls, 10% infill.
Polymkaer ABS, 250C, Goliath hot end, LDO 20mm wide extruder motor @48V, VZhextrudort OG with straight gears and brass bull gear, ValV-N-AtoR part cooling with WS7040 blower. Extruder hot end is cooled with an aquarium pump and chamber temp for this print was 59C.
Sub 7 min quality slice.
Speeds set at 500mms, 30-50K acceleration at 20SCV. PA 0.01 all features.
Standard benchy rules: .25 layer height, .5 line width, 3 bottom/top, 2 walls, 10% infill.
