Uploaded December 2023 | Updated September 2026, 3 weeks ago
Zoku RC chassis can be found here: zokurc.com/Read all about the Vanquish VS4-10 Fordyce here: tinyurl.com/mvbezyn8
Read all about the Vanquish VS4-10 Phoenix RTR here: bit.ly/3Z4P72d
Or here, at Amain Hobbies: bit.ly/3SxWZGV
Or about the VP Phoenix Kit here: bit.ly/3HNCcdJ
Upgrading your Vanquish VS410 with a LCG chassis from Zoku RC could very well be one of the most efficient performance upgrades you could consider doing! Lowering the center of gravity has always been a great way to increase the capabilities of a truck. Yet, transferring all the pieces from your RTR trail truck can seem daunting. Should you be intimidated by it? Let's find out!
Vanquish Products has released their next ready to run RC vehicle with the VS4-10 Fordyce!
Featuring a lot of components that previous owners are familiar with, the Fordyce RTR comes in a ready-built, very complete state. This latest offering from Vanquish features their electronics setup carrying the Vanquish brand, among them a 2.4Ghz radio system that features 4 channels, a 200 oz-inch metal gear steering servo, a 3 cell LiPo ready ESC and a 35T brushed motor. The Fordyce comes with the VFD transmission case which has an exceptionally low center of gravity and can be equipped with a dig servo.VFD . The radio system is fully prepared to deal with anything you can throw at it.
The straight F10 axles boast some high entrance pinion gears, an easy to build and maintain cradle for the ring and pinion gear, oversized bearings and chromoly axleshafts. 47 degrees of steering angle in the front assures a tight turning radius and the 6.5% overdrive that you find stock can even be elevated to 46% with the optional servo installed. An off-center front pumpkin and centered rear make ensure a realistic look, while also giving the Vanquish VS4-10 Phoenix one of the most level, balanced drivetrains on the market.
In this video I give you a full run down of all the specifications and features of this truck, that in my opinion will set a new benchmark for RTR RC trucks. The Vanquish VS4-10 is very complete and sets the bar just a bit higher, creating some very interesting challenges for the competition to deal with in years to come.
Tamiya paints: bit.ly/3d0tmJy
APPAREL! teespring.com/stores/hemistore
If you haven't subscribed yet, please do. It's free. NO PayPal, NO Patreon and especially no GoFundme nonsense. I hate those.
Check out HemiStorm Products on FaceBook here: facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram: instagram.com/hemistorm
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link: hemistorm.com
#vanquishfordyce #vs410fordyce #vs410rtr
Zoku RC chassis can be found here: zokurc.com/Read all about the Vanquish VS4-10 Fordyce here: tinyurl.com/mvbezyn8
Read all about the Vanquish VS4-10 Phoenix RTR here: bit.ly/3Z4P72d
Or here, at Amain Hobbies: bit.ly/3SxWZGV
Or about the VP Phoenix Kit here: bit.ly/3HNCcdJ
Upgrading your Vanquish VS410 with a LCG chassis from Zoku RC could very well be one of the most efficient performance upgrades you could consider doing! Lowering the center of gravity has always been a great way to increase the capabilities of a truck. Yet, transferring all the pieces from your RTR trail truck can seem daunting. Should you be intimidated by it? Let's find out!
Vanquish Products has released their next ready to run RC vehicle with the VS4-10 Fordyce!
Featuring a lot of components that previous owners are familiar with, the Fordyce RTR comes in a ready-built, very complete state. This latest offering from Vanquish features their electronics setup carrying the Vanquish brand, among them a 2.4Ghz radio system that features 4 channels, a 200 oz-inch metal gear steering servo, a 3 cell LiPo ready ESC and a 35T brushed motor. The Fordyce comes with the VFD transmission case which has an exceptionally low center of gravity and can be equipped with a dig servo.VFD . The radio system is fully prepared to deal with anything you can throw at it.
The straight F10 axles boast some high entrance pinion gears, an easy to build and maintain cradle for the ring and pinion gear, oversized bearings and chromoly axleshafts. 47 degrees of steering angle in the front assures a tight turning radius and the 6.5% overdrive that you find stock can even be elevated to 46% with the optional servo installed. An off-center front pumpkin and centered rear make ensure a realistic look, while also giving the Vanquish VS4-10 Phoenix one of the most level, balanced drivetrains on the market.
In this video I give you a full run down of all the specifications and features of this truck, that in my opinion will set a new benchmark for RTR RC trucks. The Vanquish VS4-10 is very complete and sets the bar just a bit higher, creating some very interesting challenges for the competition to deal with in years to come.
Tamiya paints: bit.ly/3d0tmJy
APPAREL! teespring.com/stores/hemistore
If you haven't subscribed yet, please do. It's free. NO PayPal, NO Patreon and especially no GoFundme nonsense. I hate those.
Check out HemiStorm Products on FaceBook here: facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram: instagram.com/hemistorm
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link: hemistorm.com
#vanquishfordyce #vs410fordyce #vs410rtr
