Uploaded January 2021 | Updated November 2026, 1 day ago
In video video, we use OpenWRT Firewall to configure Port Forwarding and Traffic Rules. We will discuss the basic concept of Firerwall, such as zones, actions and network interfaces. As a demonstration, we will open a for a port for the router (configure port forward from WAN to LAN) and allow SSH access to the OpenWRT router via port 22 by creating a traffic rule.
Video timeframe:
00:00 - OpenWRT Firewall Zones Introduction
01:35 - Differences between Port Forward and Traffic Rules
02:30 - Port forwarding on OpenWRT - Open port 80 for HTTP
03:10 - Static Lease / Reserved IP with DHCP server
06:00 - Configure Port Forward in LuCI
08:09 - Check if a port is Open or Closed
09:00 - OpenWRT Traffic Rules
09:10 - Example - Enable SSH access to the OpenWRT router from Internet
11:45 - Tip about Soure and Destination port
13:18 - Warning and Final words
More information about OpenWRT Firewall: openwrt.org/docs/guide-user/firewall/start
Thank for watching and see you in the next video!
In video video, we use OpenWRT Firewall to configure Port Forwarding and Traffic Rules. We will discuss the basic concept of Firerwall, such as zones, actions and network interfaces. As a demonstration, we will open a for a port for the router (configure port forward from WAN to LAN) and allow SSH access to the OpenWRT router via port 22 by creating a traffic rule.
Video timeframe:
00:00 - OpenWRT Firewall Zones Introduction
01:35 - Differences between Port Forward and Traffic Rules
02:30 - Port forwarding on OpenWRT - Open port 80 for HTTP
03:10 - Static Lease / Reserved IP with DHCP server
06:00 - Configure Port Forward in LuCI
08:09 - Check if a port is Open or Closed
09:00 - OpenWRT Traffic Rules
09:10 - Example - Enable SSH access to the OpenWRT router from Internet
11:45 - Tip about Soure and Destination port
13:18 - Warning and Final words
More information about OpenWRT Firewall: openwrt.org/docs/guide-user/firewall/start
Thank for watching and see you in the next video!






![Zimaboard Overview - OpenWRT Installation & Performance Test
[English subtitle available] ZimaBoard is an x86 Single Board Computer. In this video, I am going to show you an overview of the Zimaboard. After that, we will install OpenWRT on this board and see how it work as a router. I have also configured PPPoE with VLAN and the device was working great. Due to the video length, I only performed some basic throughput tests with OpenSpeedTest & iperf3 (WAN port as DHCP client). Further tests will be in the next video.
Video timeframe:
00:00 - Zimaboard Overview
00:49 - Zimaboard Pre-Installed with CasaOS
01:22 - Zimaboard Specification (IO Ports)
02:13 - Zimaboard Features
02:42 - Zimaboard 216, Zimaboard 432 & Zimaboard 832 Differences
04:06 - Install OpenWRT on the Zimaboard 216 with USB
04:23 - Download OpenWRT firmware & Write to the USB Key
06:19 - Booting OpenWRT 21.02 on the ZimaBoard 216
08:19 - Which is WAN Port & LAN Port?
08:57 - Login to OpenWRT running on the Zimaboard
11:46 - Quick Speedtest
12:32 - WAN to LAN Throughput Test - No Offloading
13:38 - WAN to LAN Throughput Test - Software Offloading
14:33 - WAN to LAN Throughput Test - SW + HW Offloading
15:21 - CPU Utilisation with Packet Steering enabled
16:23 - Configure PPPoE with VLAN
18:18 - A Quick PPPoE with VLAN Speedtest on Zimaboard
You can learn more about the board here https://www.zimaboard.com
Or get it from Seed (CN) - https://www.seeedstudio.com/ZimaBoard-832-X86-p-5297.html
Or get it from Cytron (Malaysia) - https://bit.ly/3yIP80X
Thanks for watching and see ya! Zimaboard Overview - OpenWRT Installation & Performance Test](https://i.ytimg.com/vi/7Klp8ZtOorg/mqdefault.jpg)



