Uploaded December 2024 | Updated November 2026, 1 day ago
In 2024, the OpenWrt project celebrates its 20th anniversary! To mark this milestone, meet the OpenWrt One – an open-source hardware router designed by the OpenWrt community and manufactured by Banana Pi.
In this video, I’ll unbox the device, walk you through its specs, and guide you through the initial setup. We’ll upgrade the firmware and test WAN to LAN throughput over Ethernet and WiFi 6. Let's see how this community-built router holds up!
OpenWrt One Brief:
CPU: MediaTek MT7981B (Filogic 820) (Dual Core, 1.3GHz)
Wireless: Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3 5Ghz)
Memory: 1GB DDR4
Ethernet: 1 x 2.5GbE RJ45 port and |1 x Gigabit Ethernet RJ45 port
Flash: 256 MiB SPI NAND and 16 MiB SPI NOR flash
Video timeframe:
00:00 - OpenWrt One Introduction
00:24 - OpenWrt Specification and I/O
01:54 - Pricing and Option
02:12 - OpenWrt Complete Set Unboxing
02:45 - Intial Setup
03:12 - Logic to LuCI Web Interface & Overview
04:30 - Upgrade OpenWrt firmware using USB Flash
05:51 - Install LuCI with apk (something new)
06:53 - WAN to LAN Throughtput via Ethernet (No Offloading)
07:51 - WAN to LAN Throughtput via Ethernet (Software Offloading)
08:38 - Set WiFi SSID
09:16 - WiFi 6 - 2.4GHz Test (WAN to LAN)
09:52 - WiFi 6 - 5GHz Test (WAN to LAN)
10:57 - More WiFi 6 5GHz Tests (not stable)
12:00 - Power Consumption
I would like to express my gratitude to Judy from Banana Pi for sending me the OpenWrt One, in order to make this video. Yet this video is not sponsored by Banana Pi :)
Link to Banana Pi Product Page: banana-pi.org/en/bananapi-router/173.html
OpenWrt One Docs: docs.banana-pi.org/en/OpenWRT-One/BananaPi_OpenWRT-One
OpenWrt One Firmware - openwrt.org/toh/openwrt/one
Buy the OpenWrt One (affiliate): amzn.to/4kpWvzq
Thank you for watching and see you in the next video!
In 2024, the OpenWrt project celebrates its 20th anniversary! To mark this milestone, meet the OpenWrt One – an open-source hardware router designed by the OpenWrt community and manufactured by Banana Pi.
In this video, I’ll unbox the device, walk you through its specs, and guide you through the initial setup. We’ll upgrade the firmware and test WAN to LAN throughput over Ethernet and WiFi 6. Let's see how this community-built router holds up!
OpenWrt One Brief:
CPU: MediaTek MT7981B (Filogic 820) (Dual Core, 1.3GHz)
Wireless: Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3 5Ghz)
Memory: 1GB DDR4
Ethernet: 1 x 2.5GbE RJ45 port and |1 x Gigabit Ethernet RJ45 port
Flash: 256 MiB SPI NAND and 16 MiB SPI NOR flash
Video timeframe:
00:00 - OpenWrt One Introduction
00:24 - OpenWrt Specification and I/O
01:54 - Pricing and Option
02:12 - OpenWrt Complete Set Unboxing
02:45 - Intial Setup
03:12 - Logic to LuCI Web Interface & Overview
04:30 - Upgrade OpenWrt firmware using USB Flash
05:51 - Install LuCI with apk (something new)
06:53 - WAN to LAN Throughtput via Ethernet (No Offloading)
07:51 - WAN to LAN Throughtput via Ethernet (Software Offloading)
08:38 - Set WiFi SSID
09:16 - WiFi 6 - 2.4GHz Test (WAN to LAN)
09:52 - WiFi 6 - 5GHz Test (WAN to LAN)
10:57 - More WiFi 6 5GHz Tests (not stable)
12:00 - Power Consumption
I would like to express my gratitude to Judy from Banana Pi for sending me the OpenWrt One, in order to make this video. Yet this video is not sponsored by Banana Pi :)
Link to Banana Pi Product Page: banana-pi.org/en/bananapi-router/173.html
OpenWrt One Docs: docs.banana-pi.org/en/OpenWRT-One/BananaPi_OpenWRT-One
OpenWrt One Firmware - openwrt.org/toh/openwrt/one
Buy the OpenWrt One (affiliate): amzn.to/4kpWvzq
Thank you for watching and see you in the next video!





![Zimaboard Overview - OpenWRT Installation & Performance Test
[English subtitle available] ZimaBoard is an x86 Single Board Computer. In this video, I am going to show you an overview of the Zimaboard. After that, we will install OpenWRT on this board and see how it work as a router. I have also configured PPPoE with VLAN and the device was working great. Due to the video length, I only performed some basic throughput tests with OpenSpeedTest & iperf3 (WAN port as DHCP client). Further tests will be in the next video.
Video timeframe:
00:00 - Zimaboard Overview
00:49 - Zimaboard Pre-Installed with CasaOS
01:22 - Zimaboard Specification (IO Ports)
02:13 - Zimaboard Features
02:42 - Zimaboard 216, Zimaboard 432 & Zimaboard 832 Differences
04:06 - Install OpenWRT on the Zimaboard 216 with USB
04:23 - Download OpenWRT firmware & Write to the USB Key
06:19 - Booting OpenWRT 21.02 on the ZimaBoard 216
08:19 - Which is WAN Port & LAN Port?
08:57 - Login to OpenWRT running on the Zimaboard
11:46 - Quick Speedtest
12:32 - WAN to LAN Throughput Test - No Offloading
13:38 - WAN to LAN Throughput Test - Software Offloading
14:33 - WAN to LAN Throughput Test - SW + HW Offloading
15:21 - CPU Utilisation with Packet Steering enabled
16:23 - Configure PPPoE with VLAN
18:18 - A Quick PPPoE with VLAN Speedtest on Zimaboard
You can learn more about the board here https://www.zimaboard.com
Or get it from Seed (CN) - https://www.seeedstudio.com/ZimaBoard-832-X86-p-5297.html
Or get it from Cytron (Malaysia) - https://bit.ly/3yIP80X
Thanks for watching and see ya! Zimaboard Overview - OpenWRT Installation & Performance Test](https://i.ytimg.com/vi/7Klp8ZtOorg/mqdefault.jpg)




