Uploaded April 2025 | Updated November 2026, 1 day ago
Extreme Networks WS-AP3825i is a dual-band 3×3 MIMO “enterprise grade” access point with two Gigabit Ethernet ports, powered by the Freescale P1020E, 800 MHz dual-core 32-bit PowerPC processor. It comes with 256 MB DDR3 SDRAM and 64 MB NOR flash.
In this video, we will see the performance of the WS-AP3825i running OpenWrt 24. The test will cover WAN to LAN throughput test since the AP has 2 Gigabit Ethernet ports. We will also do LAN to LAN throughput via the 2.4GHz WiFi and 5GHz WiFi.
Video time frame:
00:00 - WS-AP3825i Intro
00:38 - My Internet speed test
00:56 - Login to LuCI Web-UI & Config Overview
01:25 - WAN to LAN throughput test (offloading disabled)
01:59 - WAN to LAN throughput test (offloading enabled)
02:23 - Setup WS-AP3825i as Acess Point
02:48 - Wireless LAN throughput test (5GHz)
03:27 - Wireless LAN throughput test (2.4GHz)
03:54 - Conclusion
You can check out the WS-AP3825i OpenWrt ToH at openwrt.org/toh/extreme_networks/ws-ap3825i
Thanks for watching and see you in the next video!
Extreme Networks WS-AP3825i is a dual-band 3×3 MIMO “enterprise grade” access point with two Gigabit Ethernet ports, powered by the Freescale P1020E, 800 MHz dual-core 32-bit PowerPC processor. It comes with 256 MB DDR3 SDRAM and 64 MB NOR flash.
In this video, we will see the performance of the WS-AP3825i running OpenWrt 24. The test will cover WAN to LAN throughput test since the AP has 2 Gigabit Ethernet ports. We will also do LAN to LAN throughput via the 2.4GHz WiFi and 5GHz WiFi.
Video time frame:
00:00 - WS-AP3825i Intro
00:38 - My Internet speed test
00:56 - Login to LuCI Web-UI & Config Overview
01:25 - WAN to LAN throughput test (offloading disabled)
01:59 - WAN to LAN throughput test (offloading enabled)
02:23 - Setup WS-AP3825i as Acess Point
02:48 - Wireless LAN throughput test (5GHz)
03:27 - Wireless LAN throughput test (2.4GHz)
03:54 - Conclusion
You can check out the WS-AP3825i OpenWrt ToH at openwrt.org/toh/extreme_networks/ws-ap3825i
Thanks for watching and see you in the next video!



![Zimaboard Overview - OpenWRT Installation & Performance Test
[English subtitle available] ZimaBoard is an x86 Single Board Computer. In this video, I am going to show you an overview of the Zimaboard. After that, we will install OpenWRT on this board and see how it work as a router. I have also configured PPPoE with VLAN and the device was working great. Due to the video length, I only performed some basic throughput tests with OpenSpeedTest & iperf3 (WAN port as DHCP client). Further tests will be in the next video.
Video timeframe:
00:00 - Zimaboard Overview
00:49 - Zimaboard Pre-Installed with CasaOS
01:22 - Zimaboard Specification (IO Ports)
02:13 - Zimaboard Features
02:42 - Zimaboard 216, Zimaboard 432 & Zimaboard 832 Differences
04:06 - Install OpenWRT on the Zimaboard 216 with USB
04:23 - Download OpenWRT firmware & Write to the USB Key
06:19 - Booting OpenWRT 21.02 on the ZimaBoard 216
08:19 - Which is WAN Port & LAN Port?
08:57 - Login to OpenWRT running on the Zimaboard
11:46 - Quick Speedtest
12:32 - WAN to LAN Throughput Test - No Offloading
13:38 - WAN to LAN Throughput Test - Software Offloading
14:33 - WAN to LAN Throughput Test - SW + HW Offloading
15:21 - CPU Utilisation with Packet Steering enabled
16:23 - Configure PPPoE with VLAN
18:18 - A Quick PPPoE with VLAN Speedtest on Zimaboard
You can learn more about the board here https://www.zimaboard.com
Or get it from Seed (CN) - https://www.seeedstudio.com/ZimaBoard-832-X86-p-5297.html
Or get it from Cytron (Malaysia) - https://bit.ly/3yIP80X
Thanks for watching and see ya! Zimaboard Overview - OpenWRT Installation & Performance Test](https://i.ytimg.com/vi/7Klp8ZtOorg/mqdefault.jpg)






