Uploaded September 2021 | Updated November 2026, 1 day ago
In this video, we will configure extroot to expand the router's storage space with a USB drive or a USB hard drive. Basically, we are about to move the /overlay mountpoint to the USB device which was formatted with ext4 file system.
This tutorial will be very useful if your OpenWRT router has small Flash memory, for example the D-Link DIR-842 C2. At the same time, I will also demonstrate how to manually download and install Adguard Home package on the newly created /overlay mount poin on the USB device.
Video timeframe:
00:00 - Intro
00:44 - OpenWRT Flash Partitioning Overview
02:16 - Hardware overview - Router and USB drive
03:00 - ExtRoot Configuration
07:20 - Check if the Storage Space Increased
08:24 - Download & Install Adguard Home on the USB Driver
Resources:
- Install Adguard Home on OpenWRT - youtu.be/yMcM40ipDlQ
- ExtRoot Configuration - openwrt.org/docs/guide-user/additional-software/extroot_configuration
- OpenWRT Flash Layout - openwrt.org/docs/techref/flash.layout
Thanks for watching and see you in the next video!
In this video, we will configure extroot to expand the router's storage space with a USB drive or a USB hard drive. Basically, we are about to move the /overlay mountpoint to the USB device which was formatted with ext4 file system.
This tutorial will be very useful if your OpenWRT router has small Flash memory, for example the D-Link DIR-842 C2. At the same time, I will also demonstrate how to manually download and install Adguard Home package on the newly created /overlay mount poin on the USB device.
Video timeframe:
00:00 - Intro
00:44 - OpenWRT Flash Partitioning Overview
02:16 - Hardware overview - Router and USB drive
03:00 - ExtRoot Configuration
07:20 - Check if the Storage Space Increased
08:24 - Download & Install Adguard Home on the USB Driver
Resources:
- Install Adguard Home on OpenWRT - youtu.be/yMcM40ipDlQ
- ExtRoot Configuration - openwrt.org/docs/guide-user/additional-software/extroot_configuration
- OpenWRT Flash Layout - openwrt.org/docs/techref/flash.layout
Thanks for watching and see you in the next video!




![Zimaboard Overview - OpenWRT Installation & Performance Test
[English subtitle available] ZimaBoard is an x86 Single Board Computer. In this video, I am going to show you an overview of the Zimaboard. After that, we will install OpenWRT on this board and see how it work as a router. I have also configured PPPoE with VLAN and the device was working great. Due to the video length, I only performed some basic throughput tests with OpenSpeedTest & iperf3 (WAN port as DHCP client). Further tests will be in the next video.
Video timeframe:
00:00 - Zimaboard Overview
00:49 - Zimaboard Pre-Installed with CasaOS
01:22 - Zimaboard Specification (IO Ports)
02:13 - Zimaboard Features
02:42 - Zimaboard 216, Zimaboard 432 & Zimaboard 832 Differences
04:06 - Install OpenWRT on the Zimaboard 216 with USB
04:23 - Download OpenWRT firmware & Write to the USB Key
06:19 - Booting OpenWRT 21.02 on the ZimaBoard 216
08:19 - Which is WAN Port & LAN Port?
08:57 - Login to OpenWRT running on the Zimaboard
11:46 - Quick Speedtest
12:32 - WAN to LAN Throughput Test - No Offloading
13:38 - WAN to LAN Throughput Test - Software Offloading
14:33 - WAN to LAN Throughput Test - SW + HW Offloading
15:21 - CPU Utilisation with Packet Steering enabled
16:23 - Configure PPPoE with VLAN
18:18 - A Quick PPPoE with VLAN Speedtest on Zimaboard
You can learn more about the board here https://www.zimaboard.com
Or get it from Seed (CN) - https://www.seeedstudio.com/ZimaBoard-832-X86-p-5297.html
Or get it from Cytron (Malaysia) - https://bit.ly/3yIP80X
Thanks for watching and see ya! Zimaboard Overview - OpenWRT Installation & Performance Test](https://i.ytimg.com/vi/7Klp8ZtOorg/mqdefault.jpg)





