NXP FRDM i.MX RT1186 Development Platform - Unboxing | DigiKey @DigiKeyProductDiscovery
NXP FRDM i.MX RT1186 Development Platform - Unboxing | DigiKey  @DigiKeyProductDiscovery
Uploaded June 2026 | Updated November 2026, 3 hours ago
We take a look at the FRDM i.MX RT1186 Development Platform from NXP, a cost-effective development board for prototyping PLCs, remote IOs, motor control, and other industrial automation applications.

Inside the box, you’ll find i.MX RT1186 FRDM board, a quick start guide, and a USB-C cable. The board is based on the i.MX RT1180 crossover MCU that combines real time control, Gigabit TSN and EtherCAT industrial networking, and advanced security, all on a single chip.

In this demo we’re going to import and run a project in VS Code using the MCUXpresso for VS Code extension , then use the MCUXpresso Config Tools to make some changes to that project.
Plug the board in using the USB-C cable. The board has two USB-C ports. Use the one on the left side labeled DEBUG USB. Follow the instructions in the getting started guide to install and setup all of the necessary software.

In the MCUXpresso Extension in VS Code, select Import Example from Repository, and import the rgpio_led_output_cm33 example project, then build and debug, and the RGB LED will blink. To change which GPIO is being used to control the LED blinking, right-click on the project and select Open with MCUXpresso config tools. In the Pins view, you can toggle filters to find available pins to select a different GPIO for the RGB LED. In this case, I’ve selected D2, which is IO 20. Set the pin as output, then click update code to generate new pin_mux C and header files. In rgpio_led_output.c, we need to define a macro for the LED BLUE pin and change the code to use this pin. Then build and debug to run the updated code. With the included examples and MCUXpresso tools, it’s easy to get started on your own project.

nxp.com/document/guide/getting-started-with-frdm-imxrt1186:GS-FRDM-IMXRT1186?section=create

digikey.com/en/products/detail/nxp-usa-inc/FRDM-IMXRT1186/27281013

digikey.com/en/product-highlight/n/nxp-semi/i-mx-rt1180-crossover-mcus

digikey.com/en/products/detail/nxp-usa-inc/MIMXRT1180-EVK/22036107

Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
NXP FRDM i.MX RT1186 Development Platform - Unboxing | DigiKeySTMicroelectronics - X-NUCLEO-53L9A1- Unboxing | DigiKeyHoneywell ILFS Liquid Flow Sensor - Unboxing | DigiKeyGXS Series Integrated Current Sensors from LEM PIO | DigiKeyMolex MX-DaSH Wire-to-Wire Connector System – PTM | DigiKeyCurrent Limiting vs Current Interrupting #CircuitProtection #EngineeringBasics #ElectricalConceptsRenesas RA6W1 Evaluation Kit – Unboxing | DigiKeyMicrochip EV94U98A Motor Control Evaluation Kit - Unboxing | DigiKeyAP53781 and AP53782 USB PD Dual-Role Power Controllers from Diodes, Inc. PIO | DigiKeyUse Shorter Strips of Solder Wick #DesolderingTip #Rework #PCBRepairUQD and UQDB Liquid Cooling Connectors from Amphenol Industrial PIO | DigiKeyIN6 Series 6 mm Indicators from CIT Relay & Switch  PIO | DigiKey
DigiKey Product Discovery |

NXP FRDM i.MX RT1186 Development Platform - Unboxing | DigiKey

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER