Uploaded May 2026 | Updated September 2026, 9 hours ago
🔥 YesWelder MIG-205DS Pro — first out of the box, straight onto a real project. No babying it in. I put this thing to work on my flat deck car hauler trailer adding 8 heavy duty D-rings for proper tie down points and building a rock solid winch mount on the tongue. Here's how it held up.
🔧 GEAR USED IN THIS VIDEO:
Amazon Links (amazon affiliate links may earn commissions)
➤ YesWelder MIG-205DS Pro — amzn.to/3R9asbK
➤ YesWelder Welding Gas Regulator — amzn.to/4ucS2pa
➤ YesWelder ER70S-6 0.030 Solid Wire — amzn.to/48XdsOA
➤ YesWelder CUT-65DS Plus Plasma Cutter — amzn.to/3R71coz
➤ 1/2" Heavy Duty Weld-On D-Rings — amzn.to/3PeajTW
YesWelder Direct Links (links are affiliate links and may earn commissions)
➤ YesWelder MIG-205DS Pro —
🔗 yeswelder.com/collections/mig-welder/products/mig-welder-mig205?ref=uzixkppa
➤ YesWelder Welding Gas Regulator —
🔗 yeswelder.com/collections/accessories/products/gas-regulator-qb01?ref=uzixkppa
➤ YesWelder ER70S-6 0.030 Solid Wire —
🔗 yeswelder.com/collechttps://yeswelder.com/collections/accessories/products/welding-wire-er70s610030tions/accessories/products/gas-regulator-qb01?ref=uzixkppa
➤ YesWelder CUT-65DS Plus Plasma Cutter —
🔗 yeswelder.com/collections/plasma-cutter/products/plasma-cutters-cut-65ds?ref=uzixkppa
📢
🛒 OneMoreBolt Merch → 🔗onemorebolt.printful.me
📢
📌 TIMESTAMPS:
0:00 — Intro & Project Overview
0:28 — MIG-205DS Pro Machine Walkthrough & Setup
1:57 — First Out of the Box Test Weld
11:08 — Off-Camera Test Results Review
11:59 — Car Hauler D-Ring Install (Welding Montage)
16:11 — D-Ring Results & Experience
18:35 — Winch Mount Build Begins
20:00 — Cutting w/ YesWelder CUT-65DS Plus
21:50 — Test Fitting the Winch Mount
26:16 — Final Fitup and Welding of the Winch Mount
30:37 — Final Thoughts on the MIG-205DS Pro
In this video I'm reviewing the YesWelder MIG-205DS Pro MIG welder fresh out of the box on a real world project — no perfect shop conditions, just real structural work. The project is my flat deck car hauler trailer that came from the factory with absolutely no D-rings or tie down points — a problem that needed fixing before another car goes on the deck.
I weld in 8 heavy duty D-rings at key load points across the trailer, then build a winch mount from scratch on the tongue — cutting the pieces with the YesWelder CUT-65DS Plus plasma cutter before welding it all together with the MIG-205DS Pro. After getting the new winch mounted up, I wrap up with my honest final thoughts on the machine after putting it through real structural work. I'm also running the YesWelder welding gas regulator and YesWelder ER70S-6 0.030 solid welding wire throughout. Yeah, YesWelder can deliver an end to solution on a budget for any diy project like this and much more.
👍 If this helped, smash the like — it helps more people find the channel.
🔔 Subscribe for more budget builds done the old fashioned way.
#YesWelder #MIGWelder #TrailerBuild #DIYWelding #OneMoreBolt
🔥 YesWelder MIG-205DS Pro — first out of the box, straight onto a real project. No babying it in. I put this thing to work on my flat deck car hauler trailer adding 8 heavy duty D-rings for proper tie down points and building a rock solid winch mount on the tongue. Here's how it held up.
🔧 GEAR USED IN THIS VIDEO:
Amazon Links (amazon affiliate links may earn commissions)
➤ YesWelder MIG-205DS Pro — amzn.to/3R9asbK
➤ YesWelder Welding Gas Regulator — amzn.to/4ucS2pa
➤ YesWelder ER70S-6 0.030 Solid Wire — amzn.to/48XdsOA
➤ YesWelder CUT-65DS Plus Plasma Cutter — amzn.to/3R71coz
➤ 1/2" Heavy Duty Weld-On D-Rings — amzn.to/3PeajTW
YesWelder Direct Links (links are affiliate links and may earn commissions)
➤ YesWelder MIG-205DS Pro —
🔗 yeswelder.com/collections/mig-welder/products/mig-welder-mig205?ref=uzixkppa
➤ YesWelder Welding Gas Regulator —
🔗 yeswelder.com/collections/accessories/products/gas-regulator-qb01?ref=uzixkppa
➤ YesWelder ER70S-6 0.030 Solid Wire —
🔗 yeswelder.com/collechttps://yeswelder.com/collections/accessories/products/welding-wire-er70s610030tions/accessories/products/gas-regulator-qb01?ref=uzixkppa
➤ YesWelder CUT-65DS Plus Plasma Cutter —
🔗 yeswelder.com/collections/plasma-cutter/products/plasma-cutters-cut-65ds?ref=uzixkppa
📢
🛒 OneMoreBolt Merch → 🔗onemorebolt.printful.me
📢
📌 TIMESTAMPS:
0:00 — Intro & Project Overview
0:28 — MIG-205DS Pro Machine Walkthrough & Setup
1:57 — First Out of the Box Test Weld
11:08 — Off-Camera Test Results Review
11:59 — Car Hauler D-Ring Install (Welding Montage)
16:11 — D-Ring Results & Experience
18:35 — Winch Mount Build Begins
20:00 — Cutting w/ YesWelder CUT-65DS Plus
21:50 — Test Fitting the Winch Mount
26:16 — Final Fitup and Welding of the Winch Mount
30:37 — Final Thoughts on the MIG-205DS Pro
In this video I'm reviewing the YesWelder MIG-205DS Pro MIG welder fresh out of the box on a real world project — no perfect shop conditions, just real structural work. The project is my flat deck car hauler trailer that came from the factory with absolutely no D-rings or tie down points — a problem that needed fixing before another car goes on the deck.
I weld in 8 heavy duty D-rings at key load points across the trailer, then build a winch mount from scratch on the tongue — cutting the pieces with the YesWelder CUT-65DS Plus plasma cutter before welding it all together with the MIG-205DS Pro. After getting the new winch mounted up, I wrap up with my honest final thoughts on the machine after putting it through real structural work. I'm also running the YesWelder welding gas regulator and YesWelder ER70S-6 0.030 solid welding wire throughout. Yeah, YesWelder can deliver an end to solution on a budget for any diy project like this and much more.
👍 If this helped, smash the like — it helps more people find the channel.
🔔 Subscribe for more budget builds done the old fashioned way.
#YesWelder #MIGWelder #TrailerBuild #DIYWelding #OneMoreBolt
