Uploaded June 2026 | Updated November 2026, 3 hours ago
Learn to build a motor runtime alarm on the P1-M622 Mini PLC using a TMR timer in a start-stop circuit, with an operator reset pushbutton.
โก QUICK ANSWER
On the P1-M622 Mini PLC, add a TMR timer to your start-stop rung and drive it with the motor output (DO 0.1.1) as the run condition, so it accumulates time only while the motor runs. Compare that accumulated value to your limit with a greater-than instruction and wire it to an alarm output (DO 0.1.1.4) โ here, the light turns on after 20 seconds. A reset pushbutton on a digital input (DI 0.1.1.7) clears the accumulated time once the operator acknowledges.
๐ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-โฑ๏ธ
๐ WHAT YOU'LL LEARN
โ Add a TMR timer to a start-stop circuit using the motor output as the run condition
โ Track exact motor run time with the timer's accumulator
โ Trigger an alarm output when runtime exceeds 20 seconds using a greater-than compare
โ Wire an operator reset pushbutton to clear accumulated time on acknowledge
โ Apply a runtime-exceeded alarm pattern used in real industrial applications
โ FREQUENTLY ASKED
Q: What drives the TMR timer in a start-stop circuit?
A: The motor output bit (DO 0.1.1) is used as the timer's run condition, so it only counts while the motor is actually running.
Q: How does the alarm reset?
A: A reset pushbutton wired to a digital input (DI 0.1.1.7) clears the timer's accumulated value when the operator acknowledges the alarm.
๐ Full step-by-step, code & wiring diagrams: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-โฑ๏ธ
๐ MORE RESOURCES
โถ Series: accautomation.ca/series
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AutomationDirect #PLCTimer #MotorControl #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca
Learn to build a motor runtime alarm on the P1-M622 Mini PLC using a TMR timer in a start-stop circuit, with an operator reset pushbutton.
โก QUICK ANSWER
On the P1-M622 Mini PLC, add a TMR timer to your start-stop rung and drive it with the motor output (DO 0.1.1) as the run condition, so it accumulates time only while the motor runs. Compare that accumulated value to your limit with a greater-than instruction and wire it to an alarm output (DO 0.1.1.4) โ here, the light turns on after 20 seconds. A reset pushbutton on a digital input (DI 0.1.1.7) clears the accumulated time once the operator acknowledges.
๐ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-โฑ๏ธ
๐ WHAT YOU'LL LEARN
โ Add a TMR timer to a start-stop circuit using the motor output as the run condition
โ Track exact motor run time with the timer's accumulator
โ Trigger an alarm output when runtime exceeds 20 seconds using a greater-than compare
โ Wire an operator reset pushbutton to clear accumulated time on acknowledge
โ Apply a runtime-exceeded alarm pattern used in real industrial applications
โ FREQUENTLY ASKED
Q: What drives the TMR timer in a start-stop circuit?
A: The motor output bit (DO 0.1.1) is used as the timer's run condition, so it only counts while the motor is actually running.
Q: How does the alarm reset?
A: A reset pushbutton wired to a digital input (DI 0.1.1.7) clears the timer's accumulated value when the operator acknowledges the alarm.
๐ Full step-by-step, code & wiring diagrams: accautomation.ca/p1-m622-16dr-mini-plc-timer-instructions-โฑ๏ธ
๐ MORE RESOURCES
โถ Series: accautomation.ca/series
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #AutomationDirect #PLCTimer #MotorControl #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
accautomation.ca










![Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial
Master Productivity PLC Boost Use Favorites Feature! [Tutorial] ๐ญ๐ช on the Productivity PLC. Step-by-step tutorial with real-world examples.
โก QUICK ANSWER
Modbus on the Productivity PLC maps remote coils and registers into local memory. Choose the port (Modbus RTU over RS-485 or Modbus TCP over Ethernet), match baud/parity/slave-ID on both ends, then use a read/write instruction to move holding registers and coils between devices.
๐ FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
๐ WHAT YOULL LEARN
โ
Productivity PLC Boost Use Favorites Feature! [Tutorial] ๐ญ๐ช step by step on the Productivity PLC
โ
Math instructions for calculations
โ
Data move and transfer instructions
โ
Real-world tips from manufacturing experience
โ FREQUENTLY ASKED
Q: RTU or TCP โ which do I use?
A: RTU runs over RS-485 serial; TCP runs over Ethernet. Pick whichever your device supports. Both are shown in the full guide.
Q: Why wonโt my Modbus device respond?
A: Confirm baud rate, parity, and slave ID match exactly, and check A/B wiring polarity on RS-485.
๐ Full step-by-step, code & wiring diagrams: https://accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions/
๐ MORE RESOURCES
โถ Series: https://accautomation.ca/series/productivity-plc/
โถ PLC Beginners Guide: https://accautomation.ca/programming/plc-beginners-guide/
โถ Free eBooks: https://accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: https://www.automationdirect.com/
โถ Parts Guide: https://www.accautomation.ca/purchase-find-parts/
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #PLCTutorial #LearnPLC
Regards,
Garry
ACC Automation
http://www.accautomation.ca Fastest Way to Access Instructions! #PLCProgramming #Automation #Tutorial](https://i.ytimg.com/vi/J36YyCylIrI/mqdefault.jpg)