Micrometer Stand From DIY Castings @Preso58
Micrometer Stand From DIY Castings  @Preso58
Uploaded November 2026 | Updated November 2026, 18 hours ago
A micrometer stand is a device which holds a micrometer in a fixed position. It allows the operator to manipulate the part being measured without worrying about dropping the micrometer. It's also helpful for those of us with stiff and shaky fingers : (
In this episode, I finish up the machining of the cast aluminium moving jaw of the clamp mechanism. I also machine the two screws, one for the pivot mechanism and the other for the main clamp leadscrew. These are made from brass bar stock, just because I have some but they could also be made from steel. For the screw threads, I used my Threadexpress thread milling attachment because I wanted the screw threads to be fitted to a high tolerance.
You can see the full build of Threadexpress here: youtube.com/playlist?list=PLbPzkHRZCQB8KBb8UXvyCXoRFvYWKFJ-n
Also, check out Cliff Hall's Youtube channel here: @Threadexpress
If anyone wants to build your own version of the Micrometer Stand, you can download the STL files for the patterns and also the 2D drawings here: drive.google.com/drive/folders/1hiiB5iRdJdy8CPK4l8FPu73-jiRo6ZWZ?usp=drive_link

The split patterns for the jaws will need to be mirrored in your slicer software to give you both halves of the complete pattern. It's worth increasing the volume of the print by around 2 to 4% to account for shrinkage of the filament and the casting.
Micrometer Stand From DIY CastingsDiesel Foundry Furnace Burner - Part 1Cleveland Racer Part 5 - Polishing Castings and Axle ManufacturingBuilding the Titan .60 Glow Plug Engine #2Black Zinc Plating in the Home ShopMicrometer Stand From DIY Castings. Weather Update, Bridgeport Update and Machining the CastingsArt Deco Wall Clock Ep 5 - Nickel Plating Brass DIY and Wood FinishingDIY ART DECO WALL SCONCES (THATS A WALL LIGHT FITTING) Part 5ThreadExpress V3. Ep.7 How To Build a Thread Milling Attachment for Your Knee Mill.A 4 Facet Drill Bit Grinder DIY Style FinalThreadExpress V3. Ep.3 Final Ops on Machining the Spindle/Leadscrew.The Stuart Turner 10H Part 6
Mark Presling |

Micrometer Stand From DIY Castings

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER