Uploaded January 2018 | Updated November 2026, 3 days ago
We were often asked why we never do any Mercury chemistry. And in fact, it wouldn't be much of a problem to get Hg salts, the problem is the prize. Quite often suppliers have incredibly high prices for simple Hg salts and it is hard to find cheaper ones.
We could make them ourselves but there is always an issue with Hg(I) and Hg(II) and if you don't have very pure Hg salts they tend to do different reactions. So we really wanted to use a pure Hg salts. Recently we were offered a small amount, probably a gram of HgCl2 only, but enough to show some of its chemistry.
Here we start off with a HgCl2 solution. To this, a small amount of NaI is added. It produces a bright orange HgI2. The cam is unable to pick up the true color but it is a really intense color.
As more NaI is added the color suddenly vanishes, as [HgI4](2-) forms.
Much like with Pb, Ag, Cd, Tl, Bi, ... the heavy, softer (HSAB) cations tend to form stable, Iodides. The color is due to a strong charge-transfer effect.
But why does the color change so rapidly? It doesn't. We only added about the tip of a spatula to the container. So the HgI2 is heavily dispersed in solution, while the coordinated product is soluble, thus losing a lot of brightness. The color only changes from orange to yellow. This blue shift is something you should be familiar with. Compare red phosphorus, which can be seen as tetrahedron-chain of the single tetrahedron white phosphorus, or the red polymeric sulfur from the smaller, yellow sulfur rings.
And in HgI2, every Hg(II) is coordinated by 4 Iodides in a tetrahedral fashion, much like in the Tetraiodomercurate. So we just cut a single tetrahedron from the lattice of HgI2 and the band gap increases a bit causing it to become yellow.
We were often asked why we never do any Mercury chemistry. And in fact, it wouldn't be much of a problem to get Hg salts, the problem is the prize. Quite often suppliers have incredibly high prices for simple Hg salts and it is hard to find cheaper ones.
We could make them ourselves but there is always an issue with Hg(I) and Hg(II) and if you don't have very pure Hg salts they tend to do different reactions. So we really wanted to use a pure Hg salts. Recently we were offered a small amount, probably a gram of HgCl2 only, but enough to show some of its chemistry.
Here we start off with a HgCl2 solution. To this, a small amount of NaI is added. It produces a bright orange HgI2. The cam is unable to pick up the true color but it is a really intense color.
As more NaI is added the color suddenly vanishes, as [HgI4](2-) forms.
Much like with Pb, Ag, Cd, Tl, Bi, ... the heavy, softer (HSAB) cations tend to form stable, Iodides. The color is due to a strong charge-transfer effect.
But why does the color change so rapidly? It doesn't. We only added about the tip of a spatula to the container. So the HgI2 is heavily dispersed in solution, while the coordinated product is soluble, thus losing a lot of brightness. The color only changes from orange to yellow. This blue shift is something you should be familiar with. Compare red phosphorus, which can be seen as tetrahedron-chain of the single tetrahedron white phosphorus, or the red polymeric sulfur from the smaller, yellow sulfur rings.
And in HgI2, every Hg(II) is coordinated by 4 Iodides in a tetrahedral fashion, much like in the Tetraiodomercurate. So we just cut a single tetrahedron from the lattice of HgI2 and the band gap increases a bit causing it to become yellow.

![Nickel Chemistry: NiO(OH) (using Hypobromite)
In this video we tried to make a Nickel(III) compound, namely the Oxidehydroxide NiO(OH), which is formed as Potassium Hypobromite oxidizes Nickel(II)Hydroxide.
Now if you watched our Bromine videos we never used elemental Bromine on its own for any experiment. Distilling, storing and handling elemental Bromine can be quite dangerous which is why we are always looking for alternative methods (if possible).
So we came up with a method we used before. To make the Bromine in situ from KBr, H2O2 and H2SO4. To this cold Heptane was added. Now the Bromine dissolves in the Heptane leaving behind the acid, water and sulfates which are formed in this reaction. Bromine and Heptane however also react quite fast which is why we had to hurry and the video is a bit shaky.
Some KOH was filled into the Erlenmeyer flask and the orange Bromine/Heptane layer added drop wise and vigorously shaken. As the two immiscible layers meet the KOH reacts with the Bromine forming the water soluble Hypobromite. So we extract the Bromine back from the Heptane layer into the aqueous one.
So we would always add a few drops of Heptane to the test tube containing Br2, shake it, extract the red layer and add it to the flask with the KOH.
In the meantime we already precipitated some Ni(OH)2. We then injected the Ni(OH)2 into the aqueous layer. To be honest we had no clue if the Hypobromite formation really worked as we planed when at some point it started to become darker and darker till it went all black which truly surprised us.
So a quick summary to what is happening:
We started with the Aqueous NiCl2 solution which is a
trans-[NiCl2(H2O)4] by the way (MnCl2 is a cis-[MnCl2(H2O)4).
Now the true composition of the Hydroxide should be something like [Ni(OH)2(H2O)4] although Nickel is capable of forming Isopolyoxo-cations [NI(OH)]4(4+) as well.
Hypobromite, much like the Hypochlorite we showed in the Permanganate video oxidizes Nickel(II) to Nickel(III).
This can be further oxidized using Peroxodisulfate to form a Nickel(IV) compound. We will show another interesting Ni(IV) complex hopefully soon and complete the series of Nickel Oxidation states.
NOTE:
Newer books suggest that NiO(OH) is in fact a mixture of Ni(II) and NI(IV) which just appears to be Ni(III). It also mentions that an oxidation with Hypochlorite will yield NiO2 with Ni(IV). Nickel Chemistry: NiO(OH) (using Hypobromite)](https://i.ytimg.com/vi/6Ae1NffosyM/mqdefault.jpg)

![Vanadium Chemistry: Reduction of V(V) by HCl
If Vanadium(V) is dissolved in conc. HCl and boiled V(IV) is supposed to form according to literature. We expected a blue compound to form but instead got a green solution.
Now looking at the Frost diagram at pH=0 V(IV) is prefered even if green V(III) forms. V(III) only becomes important once V(II) is present which does not happen here if you remember how long it took us to make V(II). V(III) will automatically synproportionate with V(V) to form V(IV). So we can be fairly sure that mostly V(IV) forms here.
But why is it green and not blue?
Back then we reduced the V(V) in a dilute acid which formed (in case of HCl) the blue [VO(H2O)5]Cl2. But if you remember our video on [Cu(H2O)6](2+) vs [CuCl4](2-) or [Co(H2O)6](2+) vs [CoCl4](2-). The color always changed in pure HCl. So we can assume that in this case a Vanadium(IV)-Oxide-Chloride complex formed.
A VOCl2 is green in fact but upon dilution will form blue compounds. We are unsure whether conc. HCl is enough to stabilize the green VOCl2. But as you can see at the end it looks green first and a few hours later slightly blueish. A few days later we added some water and suddenly it turned blue, nearly colorless. So we assume that in fact a highly chloride containing complex formed, perhaps even VOCl2 or a chloride complex of that which is green and then falls apart in water to the aqua complex which is blue. Vanadium Chemistry: Reduction of V(V) by HCl](https://i.ytimg.com/vi/6aVSnlVBUW0/mqdefault.jpg)

A solution of Bismuth Nitrate is prepared. To this a small amount of Sodium Iodide is added. A black precipitate of insoluble Bi(III)-Iodide forms. As more Iodide is added it redissolves forming the orange and soluble [BiI4](-).
Now dont assume the polyhedron to a tetrahedron or square plane right away. For main group elements such as Lead and Bismuth it may be a bit more complicated. As Bi(III) and Bi(V) exist Bi(III) must automatically have a sort of lone pair which counts ad ligand as well. For [BiI4](-) the topic is even harder than one might expect:
Tetraiodobismuthate is what we call a hypervalent compound. It has too many electrons. What happens is that for the fourth bond to an Iodide a antibonding sigma-Orbital (formed by the Bi-Iodide-bond) is used. Basically BiI3 is a Lewis Acid although it has a lone pair. And as Lewis Acid it can react with the Lewis Base Iodide to form a complex. This is why the lone pair on the BIsmuth is not used and still present afterward making the Polyhedron a trigonal bipyramid which probably undergoes a Pseudo-Rotation as well. But as all valence-orbitals are filled and the 6d-Orbitals are too far away the Iodide would have to use the 7s-Orbital which does not happen. Instead it uses the antibonding-sigma-Orbital of the Bi-I-Bonds. Bismuth Chemistry: Bi3 and [BiI4](-)](https://i.ytimg.com/vi/6y8eNOowsno/mqdefault.jpg)
![Platinum Chemistry: Pt in Aqua Regia
While looking for the bottle of tellurium we found an old bottle with Platinum foil in our element collection. So we decided to test it out and dissolve some in Aqua Regia.
The Platinum dissolves to form H2[PtCl6]. Platinum Chemistry: Pt in Aqua Regia](https://i.ytimg.com/vi/79NHMA8rsL0/mqdefault.jpg)
 + 4 H2O to [B(OH)4](-) + 4 H2
So the BH3 usually doesnt escape the reaction but reacts. You can also draw this like in organic chemistry using electron paths as arrows, attack the positively charged Boron in the centre much like a carbon, and then you see that the OH already sticks to the B and the Hydrides arent simply kicked off.
Now if H2SO4 or H3PO4 as highly concentrated acids are used there is not much water that can attack the Boron so it will end in a simple hydride transfer until it reaches a point where the product can escape the reaction. Both acids usually do not coordinate that well. So BH4(-) is BH3 + H(-) because BH3 is a more or less stable structure (B2H6 is but lets say this ratio of B to H is stable) the Hydride is just more H(-) pushed onto this system. What we do in this experiment is to take it away again and free the BH3. BH3 however as all Boron compounds is a electron deficiency compound having a sextet instead of an octet only. Therefore, the more stable Diborane B2H6 is formed.
We will not talk about the structure in details because the space is too limited here but if you have time check out how B and Al handle this problem its quite interesting.
Now what happens to the H3PO4(-)? Well if you use H2SO4 it also gets reduced to SO2 and H2S in this reaction while literature says nothing about a P(III) compound. Still we believe that some P(V) might as well get reduced in this reaction, too. Boron Chemistry: Diborane from NaBH4](https://i.ytimg.com/vi/7Pk7EUDAdp4/mqdefault.jpg)

![Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)
We had several ideas to make blue Cr(II) from Cr(III). One was to reduce it using nascent Hydrogen again. So we added some HCl to a CrCl3 solution and with the help of some aluminum and 2h of reaction time we got a gray solution which did not form the expected red compound with Sodium Acetate.
Now after some literature research we found out that Cr(II) can react with acids as well forming Cr(III) again and even if we had succeeded in making the red Cr(II)-Acetate, it would dissolve in HCl.
As we didnt know this fact when we were still in the lab we decided to use the strongest reducing agent we had, elemental Lithium. So instead of Aluminum foil we would wrap a small sheet of Lithium foil around the end of pipette and dip it into the CrCl3 solution. As LiOH formed, Cr(OH)3 precipitated. So we acidified the solution again and ended up with the problem as mentioned above as acid was now present. In all of these cases we reached a gray-greenish solution which did not form any red compound with Acetate.
So we looked even further into literature and found out that Lithium Aluminum Hydride reacts with Cr(III) as well. We tried it but the reaction was too vigorous and only reacted on the water surface so we changed it for Sodium Borohydride.
So this is a week green solution of Cr(III) which is hopefully reduced by Sodium Borohydride to form the blue Cr(II). In the end we added this to Acetate and it would not react. Now it is said that these Cr(II) compounds are extremely oxophilic. Even small amounts of Oxygen can be enough to cover the red color of the acetate which might be a reason why we dont see it. Even though the Hydrogen pressure is quite high still enough oxygen might be present in the NaOAc solution to discolor the product.
As the color changed quite noticeably from green to a dark blue we assume at least some Cr(II) had formed.
There is also a way to make this compound from Cr(VI) and we will try this as well maybe it works better that way. Problem is that Chromium tends to do Hydrate-Isomerisms, it changes the Ligands, Counter-Ions and solvent molecules after some time or if the temperature is varied ( we will show this effect for Cr(III)Sulfate soon. So of course introducing some new compounds into the solution can also lead to different products, Cr(III) with Sulfate is blueish, Cr(III) with Chloride is green and if the aqua complex forms it becomes purple. So this might be an explanation for the blue color here as well.
Now space is a little limited here so we will explain the importance of the Acetate compound we were trying to make from Cr(II) Chloride in another video. If you have any suggestions on how we could isolate Cr(II) better let us know! Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)](https://i.ytimg.com/vi/850FcOTvpQU/mqdefault.jpg)

![Palladium Chemistry: Palladium Nitrate
In this video, we dissolve some elemental Palladium in conc. Nitric Acid. Palladium is somewhat similar to silver in its reactivity although it forms less passive layers which makes it soluble in HCl as well much in comparison to Silver.
If HNO3 is added a Nitrate forms which is best described as [Pd(NO3)2(H2O)2].The square plane geometry is favored in many Palladium(II) complexes which is why we only get a coordination number of 4 here.
These crystals, however, are only soluble in dilute Nitric acid. Now you might say could this be the only Nitrate which is insoluble? As usually all Nitrates are soluble and the answer is no. We have a sample of pure Bismuth Nitrate and when you add it to water it forms a lot of precipitates as well. What both do is they decompose and slowly hydrolyze in water.
The next question is what is the oxidation state here? As Pd(II) and Pd(IV) exist it isnt easy to tell what forms here. According to literature, it is the Pd(II) compound. In aqua regia, however, Pd(IV) is said to form. Same for the Chloride. We used H2O2 do accelerate the dissolution but Pd(II)Chloride and H2O2 also forms Pd(IV) so you have to be careful here. Palladium Chemistry: Palladium Nitrate](https://i.ytimg.com/vi/8nMg0x2u_h0/mqdefault.jpg)