Making Wood Magnetic Vise Jaws @ToolsToday
Making Wood Magnetic Vise Jaws  @ToolsToday
Uploaded March 2026 | Updated November 2026, 3 hours ago
Making a set of magnetic wooden jaws for the vise to prevent marring the workpiece while drilling. Using the JET Smart Drill Press to drill the holes with the auto start and depth stop features, then pressing magnets into the plywood so the jaws snap onto the vise and protect my material. A simple shop upgrade that will be super useful to have on the vise! Check out the tools used on our website -

Jet 20" Smart Drill Press - toolstoday.com/jet-jdp-20s-20-smart-drill-press.html

Fisch Black Shark 7 piece set - toolstoday.com/fisch-fsa-367185-black-shark-7-pc-imperial-set-in-box-incl-1-4-inch-1-inch-dia.html

Wilton Utility HD Vise - toolstoday.com/wilton-wl9-28815-656uhd-utility-hd-vise-6-1-2-inch-jaw-with-swivel-base.html

FEIN VersaMag Vise - toolstoday.com/fein-90701004020-versamag-vise-set.html
Making Wood Magnetic Vise JawsCutting a Custom Acrylic Router Base Plate on CNCTrick to Install Drawer Fronts AccuratelyDIY Juice Groove with a Trim RouterCutting a Clean 22 5° ChamferPerfect Glue Joints Without a JointerFlip Cut Trick for Thick StockBuilding a Floating ShelfClean Carving Through MaskingVacuum Holding for All CNC MachinesMy Favorite Workholding for CNC MachineBring the Saw to the Material 🔥 Mafell KSS 40
ToolsToday |

Making Wood Magnetic Vise Jaws

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER