DIY Juice Groove with a Trim Router @ToolsToday
DIY Juice Groove with a Trim Router  @ToolsToday
Uploaded February 2026 | Updated November 2026, 3 hours ago
Cutting a juice groove using a trim router and a simple DIY jig. A core box bit and the router base that rides along the jigs edge make this a straightforward, beginner-friendly way to add a clean juice groove to a cutting board. This is just a quick look at an easy way to do it, with more methods coming soon. Check out the tools used on our website -

X-Fasten Double Sided Tape - toolstoday.com/xfasten-double-sided-woodworking-tape-1-pack-w-yellow-backing-1-inch-wide-x-36-yards-108-ft-per-roll.html

Amana Tool 1/4" Radius Core Box Bit, item no. 45910 - toolstoday.com/v-5681-45910.html

#shorts #woodwork #diyprojects

** Subscribe - youtube.com/user/toolstoday

** Shop the website - toolstoday.com

** Like at Facebook - tinyurl.com/toolstoday-facebook

** Follow on Instagram - instagram.com/toolstoday
DIY Juice Groove with a Trim RouterCutting a Clean 22 5° ChamferPerfect Glue Joints Without a JointerFlip Cut Trick for Thick StockBuilding a Floating ShelfClean Carving Through MaskingVacuum Holding for All CNC MachinesMy Favorite Workholding for CNC MachineBring the Saw to the Material 🔥 Mafell KSS 40These Wheel Dollies Weren’t Strong Enough for a 5,000-Lb Machine | ToolsTodayTight Box Joints Every TimeDialing In a Jointer
ToolsToday |

DIY Juice Groove with a Trim Router

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER