Perfect Glue Joints Without a Jointer @ToolsToday
Perfect Glue Joints Without a Jointer  @ToolsToday
Uploaded October 2026 | Updated November 2026, 3 hours ago
Don't have a jointer? This is a simple way to get two matching edges ready for a glue up.
I held the boards together with scrap pieces and XFasten double-sided tape, then cut both mating edges at the same time on the SawStop ICS using an Amana Tool 610301 30T Glue Line Ripping Blade. Cutting both edges together gives you two matching surfaces that come back together with a really clean seam.
Check out all of the tools used on our website -
Amana Tool 10" 30T Glue Line Ripping Blade, item no. 610301 - toolstoday.com/v-7089-610301.html
SawStop 5HP ICS Table Saw, item no. ICS51230-52 - toolstoday.com/sawstop-industrial-cabinet-saw-with-52-industrial-t-glide-fence-system.html
XFasten Double Sided Woodworking Tape, item no. WO-5BMC-7UO9 - toolstoday.com/xfasten-double-sided-woodworking-tape-3-pack-w-yellow-backing-1-inch-wide-x-36-yards-108-ft-per-roll.html
Perfect Glue Joints Without a JointerFlip Cut Trick for Thick StockBuilding a Floating ShelfClean Carving Through MaskingVacuum Holding for All CNC MachinesMy Favorite Workholding for CNC MachineBring the Saw to the Material 🔥 Mafell KSS 40These Wheel Dollies Weren’t Strong Enough for a 5,000-Lb Machine | ToolsTodayTight Box Joints Every TimeDialing In a JointerLaser Cutting Clear Acrylic TemplatesCutting Leather Holder with CNC Machine
ToolsToday |

Perfect Glue Joints Without a Jointer

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER