Uploaded February 2019 | Updated November 2026, 2 hours ago
The first activation is shown at 1:00
This is the Old Western Rd / Bathurst St / Old Bathurst Rd (take your pick) level crossing at Rydal, New South Wales. It is located between Lithgow and Bathurst, on the Main Western Line. This was one of the first crossing that I filmed back in 2016, I didn't use a tripod at the time and wanted to get some better footage of the crossing before these classic signals are replaced. The first video gives a detailed look at the equipment and can be seen here youtube.com/watch?v=2LdctL1XLFA
There have been no changes to the equipment since 2016. The GRS/WRRS Type D gate mechanisms are still doing a fine job, although the Western Cullen Hayes mechanical bell on the eastern signal has died, it replaced the original teardrop bell some time after 1994. The sole working bell at the crossing is a Westinghouse hybrid bell which was installed some time before 1994, also replacing the original teardrop bell on the western signal.
At the end of the video are three old photographs taken by myself on May 11, 1994 which show the crossing when it had two tracks, black & white wishbone gates and a teardrop bell on the eastern signal. The second track and the semaphore signals were removed in 1996.
Train information:
1st train: WN12 passenger service from Bathurst to Sydney, also known as the Bathurst Bullet. Filmed on February 6, 2019.
2nd train: 3AS8 Indian Pacific from Perth to Sydney, with locomotives NR27 and G530. The train was hauled solo by NR27 from Perth to Adelaide (as train 1PA8) where the second engine (G530) was attached due to the steeper gradients between Adelaide and Sydney. Filmed on February 6, 2019.
3rd train: WN16 passenger service from Bathurst to Sydney. Filmed on February 10, 2019.
The first activation is shown at 1:00
This is the Old Western Rd / Bathurst St / Old Bathurst Rd (take your pick) level crossing at Rydal, New South Wales. It is located between Lithgow and Bathurst, on the Main Western Line. This was one of the first crossing that I filmed back in 2016, I didn't use a tripod at the time and wanted to get some better footage of the crossing before these classic signals are replaced. The first video gives a detailed look at the equipment and can be seen here youtube.com/watch?v=2LdctL1XLFA
There have been no changes to the equipment since 2016. The GRS/WRRS Type D gate mechanisms are still doing a fine job, although the Western Cullen Hayes mechanical bell on the eastern signal has died, it replaced the original teardrop bell some time after 1994. The sole working bell at the crossing is a Westinghouse hybrid bell which was installed some time before 1994, also replacing the original teardrop bell on the western signal.
At the end of the video are three old photographs taken by myself on May 11, 1994 which show the crossing when it had two tracks, black & white wishbone gates and a teardrop bell on the eastern signal. The second track and the semaphore signals were removed in 1996.
Train information:
1st train: WN12 passenger service from Bathurst to Sydney, also known as the Bathurst Bullet. Filmed on February 6, 2019.
2nd train: 3AS8 Indian Pacific from Perth to Sydney, with locomotives NR27 and G530. The train was hauled solo by NR27 from Perth to Adelaide (as train 1PA8) where the second engine (G530) was attached due to the steeper gradients between Adelaide and Sydney. Filmed on February 6, 2019.
3rd train: WN16 passenger service from Bathurst to Sydney. Filmed on February 10, 2019.










