Uploaded November 2021 | Updated November 2026, 5 hours ago
The first activation is shown at 3:30
Filmed with Tazzie Transport, check out his video here youtube.com/watch?v=OXTMSLCdSI8
This is the Mont Albert Road level crossing at Mont Albert. It is located on the Lilydale line in the eastern suburbs of Melbourne, Victoria. The crossing is being replaced by a grade separation, with the tracks being lowered into a trench beneath the road. Early works on the project have recently begun in November 2021, with the removal of trees along the side streets and installation of temporary fencing. Construction work and removal of the crossing is scheduled to be completed in 2023.
All signals have unmarked bases, with all of the lights being incandescent and mounted on McKenzie & Holland crossarms. The crossing has four Barker Technics Type 1 electronic bells, with one bell being mounted on each of the gate-less signals. The remainder of the equipment is detailed as follows, in order of appearance:
North western side:
Gate-less signal: 3 unmarked McKenzie & Holland lights and 1 Westinghouse light.
Gated signal: Westinghouse HB gate mechanism, wishbone gate with Artcraft gate lights.
South western side:
Gate-less signal: 4 unmarked McKenzie & Holland lights.
South eastern side:
Gate-less signal: 2 unmarked McKenzie & Holland lights.
Gated signal: Westinghouse HB gate mechanism, wishbone gate with Artcraft gate lights.
North eastern side:
Gate-less signal: 2 Westinghouse lights, 1 unmarked McKenzie & Holland light, 1 Western Cullen Hayes light.
Both pedestrian crossings have unmarked swing gates, most likely made by Magnetic Automation.
Filmed on June 20, 2021.
The first activation is shown at 3:30
Filmed with Tazzie Transport, check out his video here youtube.com/watch?v=OXTMSLCdSI8
This is the Mont Albert Road level crossing at Mont Albert. It is located on the Lilydale line in the eastern suburbs of Melbourne, Victoria. The crossing is being replaced by a grade separation, with the tracks being lowered into a trench beneath the road. Early works on the project have recently begun in November 2021, with the removal of trees along the side streets and installation of temporary fencing. Construction work and removal of the crossing is scheduled to be completed in 2023.
All signals have unmarked bases, with all of the lights being incandescent and mounted on McKenzie & Holland crossarms. The crossing has four Barker Technics Type 1 electronic bells, with one bell being mounted on each of the gate-less signals. The remainder of the equipment is detailed as follows, in order of appearance:
North western side:
Gate-less signal: 3 unmarked McKenzie & Holland lights and 1 Westinghouse light.
Gated signal: Westinghouse HB gate mechanism, wishbone gate with Artcraft gate lights.
South western side:
Gate-less signal: 4 unmarked McKenzie & Holland lights.
South eastern side:
Gate-less signal: 2 unmarked McKenzie & Holland lights.
Gated signal: Westinghouse HB gate mechanism, wishbone gate with Artcraft gate lights.
North eastern side:
Gate-less signal: 2 Westinghouse lights, 1 unmarked McKenzie & Holland light, 1 Western Cullen Hayes light.
Both pedestrian crossings have unmarked swing gates, most likely made by Magnetic Automation.
Filmed on June 20, 2021.










