Uploaded July 2020 | Updated November 2026, 3 hours ago
Fixed an LED TV for a mate and thought I would document it. Quick teardown, test of power supply, a way you can get away with bodging LEDs if there are just a couple of failed ones. I decided to change them all.
00:23 - How to check remote
00:45 - Check backlight
01:51 - Power supply overview
07:00 - Teardown summary
10:18 - Testing LED strips
11:26 - Finding individual bad LEDS and potential bodge fix
This machine is an LG 42LN5400.
Got the full set of LEDs from eBay for about £20.
Shopjimmy's detailed teardown vid for this particular model before starting here (most of these TVs are fairly similar)
youtu.be/T2FboV-1PJg
Electronics Repair Channel Here:
youtube.com/channel/UCooKQlg-HZ0PFAPc4Ymg3RA
Good Luck All.
Fixed an LED TV for a mate and thought I would document it. Quick teardown, test of power supply, a way you can get away with bodging LEDs if there are just a couple of failed ones. I decided to change them all.
00:23 - How to check remote
00:45 - Check backlight
01:51 - Power supply overview
07:00 - Teardown summary
10:18 - Testing LED strips
11:26 - Finding individual bad LEDS and potential bodge fix
This machine is an LG 42LN5400.
Got the full set of LEDs from eBay for about £20.
Shopjimmy's detailed teardown vid for this particular model before starting here (most of these TVs are fairly similar)
youtu.be/T2FboV-1PJg
Electronics Repair Channel Here:
youtube.com/channel/UCooKQlg-HZ0PFAPc4Ymg3RA
Good Luck All.


![Testing a Few DIY PLA Options (A Bit More Scientifically)
I hooked-up a 74LS279 Latch circuit to my C64 test rig to test some DIY PLA solutions. The circuit tests for glitches in the PLA by means of a set/reset latch. I got the idea from MindFlareRetros video below. I tested 45ns OTP ROMs with and without filters designed by Ray Carlsen, a supposed 906B chip from eBay (supposed to be the only true drop-in EPROM - if you can find a real one), a couple of pre-programmed PLS100Ns (the chip Commodore copied) and a known glitchy MOS PLA for reference. For the record, the eBay vendor that I bought the PLS100Ns from was very professional and issued my with a replacement without issues. He couldnt have been more helpful.
The chips tested were:
1) Atmel AT27C512R4RU - OTP Chip - Just CASRAM capacitor
2) Same Chip with a DIY filter designed by Ray Carlsen: http://personalpages.tds.net/%7Ercarlsen/cbm/c64/eprompla/readpla.jpg
3) eBay M27C512-90B6 - (no filtering)
4) Genuine but glitchy MOS PLA
5) eBay PLS100N
iNSPIRATION:
Mindflareretros video is here: The PLAin Truth About The C64 PLA https://www.youtube.com/watch?v=ofg33zk9uCA
Ray Carlsens pages are here:
http://personalpages.tds.net/%7Ercarlsen/cbm/
GadgetUK164s Video which started me off here:
https://www.youtube.com/watch?v=sT4OBNvboJ0
ps I recently got a copyright strike from Youtube for using, of all things, circus music! I have taken down two other videos as a precaution:
C64 Flakey PLA Fix &
C64 Re-brick reloaded
If I can find them, I will re-upload with no circus music!
Good luck All
Music is:
––––––––––––––––––––––––––––––
Track: Affect — Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/5uh7qw3NPWA
Free Download / Stream: http://alplus.io/AffectVishmak
––––––––––––––––––––––––––––––
🎵 Track Info:
Title: Affect by Vishmak
Genre and Mood: Dance & Electronic + Dramatic
License: Royalty free music for YouTube, Facebook and Instagram videos giving the appropriate credit.
——— Testing a Few DIY PLA Options (A Bit More Scientifically)](https://i.ytimg.com/vi/ArQJBimI1lk/mqdefault.jpg)







