Uploaded April 2019 | Updated November 2026, 14 hours ago
Follow on to previous video where I repaired a battery damaged A3000. In this video I fix all the broken case catches, do the Zarchos sound mod, repair the keyboard membrane, make new keyboard connectors, clean the floppy drive, scope the power supply and test it (it is fine!)
Previous video showing motherboard repairs:
youtu.be/q-kJUwcjHcc
Keyboard connectors:
20 way (easier!):
mouser.co.uk/ProductDetail/TE-Connectivity-AMP/7-520355-0?qs=%2Fha2pyFadujRi2Z6jxSELYK2qCaK%2Fu0lLKNZOnNcMpVpmJiy6B3FpA%3D%3D
2*13 way to cut down (what I did):
cjemicros.co.uk
I would go with the 20-way but they arrived late and I am impatient!
Sound Mod Tutorial (Thanks Zarchos):
stardot.org.uk/forums/viewtopic.php?t=11287
Good luck all
Follow on to previous video where I repaired a battery damaged A3000. In this video I fix all the broken case catches, do the Zarchos sound mod, repair the keyboard membrane, make new keyboard connectors, clean the floppy drive, scope the power supply and test it (it is fine!)
Previous video showing motherboard repairs:
youtu.be/q-kJUwcjHcc
Keyboard connectors:
20 way (easier!):
mouser.co.uk/ProductDetail/TE-Connectivity-AMP/7-520355-0?qs=%2Fha2pyFadujRi2Z6jxSELYK2qCaK%2Fu0lLKNZOnNcMpVpmJiy6B3FpA%3D%3D
2*13 way to cut down (what I did):
cjemicros.co.uk
I would go with the 20-way but they arrived late and I am impatient!
Sound Mod Tutorial (Thanks Zarchos):
stardot.org.uk/forums/viewtopic.php?t=11287
Good luck all
![Testing a Few DIY PLA Options (A Bit More Scientifically)
I hooked-up a 74LS279 Latch circuit to my C64 test rig to test some DIY PLA solutions. The circuit tests for glitches in the PLA by means of a set/reset latch. I got the idea from MindFlareRetros video below. I tested 45ns OTP ROMs with and without filters designed by Ray Carlsen, a supposed 906B chip from eBay (supposed to be the only true drop-in EPROM - if you can find a real one), a couple of pre-programmed PLS100Ns (the chip Commodore copied) and a known glitchy MOS PLA for reference. For the record, the eBay vendor that I bought the PLS100Ns from was very professional and issued my with a replacement without issues. He couldnt have been more helpful.
The chips tested were:
1) Atmel AT27C512R4RU - OTP Chip - Just CASRAM capacitor
2) Same Chip with a DIY filter designed by Ray Carlsen: http://personalpages.tds.net/%7Ercarlsen/cbm/c64/eprompla/readpla.jpg
3) eBay M27C512-90B6 - (no filtering)
4) Genuine but glitchy MOS PLA
5) eBay PLS100N
iNSPIRATION:
Mindflareretros video is here: The PLAin Truth About The C64 PLA https://www.youtube.com/watch?v=ofg33zk9uCA
Ray Carlsens pages are here:
http://personalpages.tds.net/%7Ercarlsen/cbm/
GadgetUK164s Video which started me off here:
https://www.youtube.com/watch?v=sT4OBNvboJ0
ps I recently got a copyright strike from Youtube for using, of all things, circus music! I have taken down two other videos as a precaution:
C64 Flakey PLA Fix &
C64 Re-brick reloaded
If I can find them, I will re-upload with no circus music!
Good luck All
Music is:
––––––––––––––––––––––––––––––
Track: Affect — Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/5uh7qw3NPWA
Free Download / Stream: http://alplus.io/AffectVishmak
––––––––––––––––––––––––––––––
🎵 Track Info:
Title: Affect by Vishmak
Genre and Mood: Dance & Electronic + Dramatic
License: Royalty free music for YouTube, Facebook and Instagram videos giving the appropriate credit.
——— Testing a Few DIY PLA Options (A Bit More Scientifically)](https://i.ytimg.com/vi/ArQJBimI1lk/mqdefault.jpg)









