Keysight 1000X I2C Decode Quirks and usage @TheBreadboardca

Uploaded June 2017 | Updated September 2026, 3 weeks ago

In this video I look at the I2C decoding of the Keysight DSOX1102G (1000X Series) and a little pitfall for newcomers We also discover a few shortcomings along he way

I also compare the I2C decoding to the Tektronix MDO3054 and look at the advantages of Segmented Memory in the 1000X series over the larger memory buffer (But no segmentation) in the MDO3054

Keysight 1000X I2C Decode Quirks and usage

EdgeRouter POE - Fixing my Home Network with Ubiquiti Network Equipment

Elegoo Smart car V4 assembly and Initial test

Magedok T116D 1080 x 1920 10 point touch screen review

Kaiweets Km601 10000 count, first look and detailed test

Arduino Programming - Electrochromic Displays ...PT2

Old laptop Screens on a Raspberry PI... Yes indeed.

Arduino Relay Shield and new lid for the IOT2020

$IOT Friday - Possibly the Cheapest IoT Node on the Planet pt1 The ESP8266 chip on its various SBC modules is rapidly becoming the GOTO for many low cost and low complexity (Relatively) solutions for an IoT Node. With Models like the SONOFF and Slampher from ITead Studio, the ESP01, ESP 12 and many other derivatives, all for well under 5$ and some close to 2$ there hard to beat. The Itead Studio parts come complete with power supply, Relay and a cloud service and Smart App. But where is the fun in just buying one and using a remote cloud service. We will go through re-programming the (ANY) ESP8266 modules with the code a friend of mine created Peter Scargill. http://tech.scargill.net/. Pete has been working with these modules for a long time and has a new set of BIN files with everything including the kitchen sink in them. check out the word doc detailing the configuration here :- https://bitbucket.org/scargill/esp-mqtt-dev/src/fe47daab214fcae49d88802f505430f8d0e5775a/Hackitt-and-Bodgitt-ESP.doc?at=master This is a 32 Bit cpu with built in WIFI, ADC, GPIO, Interrupts, SPI, I2C etc. In most applications where a developer may be tempted to use an Arduino, Launchpad or even a Raspberry PI, this little unit can do the job for a fraction of the cost. You have a choice of IDEs, including the Arduino Wiring IDE, Visual Studio, Eclipse or if you have the BIN files (As we will do in this video), a simple FLASH programmer) So with all Pete has included in this code base there is no need for me to write my own to setup my home automation system (I will show you in later videos). To complete the setup you will need at least a master control using MQTT and Node Red (If you want to minimize your coding effort). This can easily run on any Raspberry pi as a headless SBC and even on lesser powered Linux machines or alternately a Beaglebone Black. or pretty much any Linux system sporting Node Red and MQTT. You can also use Eclipse , IBM, Mosquitto MQTT Internet based services if you want as an alternative. The purpose here is to set it up at home and then allow only what you want out onto the internet. Petes setup script for the Raspberry PI can be found here :-https://bitbucket.org/snippets/scargill/KqgAe/latest-script-june-2016-read-the-comments bin files here http://www.scargill.net/rboot.bin and http://www.scargill.net/romx.bin His text based post detailing all this in his words http://tech.scargill.net/blowing-the-home-control-2016-code/ http://tech.scargill.net/slampher-unfolded/ Source code for those so inclined https://bitbucket.org/scargill/esp-mqtt-dev SONOFF Modules https://www.itead.cc/smart-home.html sonoff info https://www.itead.cc/blog/sonoff-esp8266-reprogramming-part-1-control-mains-from-anywhere$

32Bit PLCs from Barth Elektronik with Arduino Support - Part 2 of 2

theBreadboard |

Keysight 1000X I2C Decode Quirks and usage