Magedok T116D 1080 x 1920 10 point touch screen review @TheBreadboardca

Uploaded November 2018 | Updated September 2026, 3 weeks ago

This video is a review / test drive of the Magedok T116D portable display, features include

11.6" 1080 x 1920 resolution
9x16 aspect ratio
10 point capacitive Touch
built in speakers
interface with a USB 3.1 Gen 2 with a single cable including power
or via HDMI, Power and Touch via USB

Tested with Raspberry PI, PC, Canon HD G30 video Camera
Works well with MS Surface V3 Active Pens.

I would like to thank Magedok for sending me this review unit

Links to Magedok here for more products and direct pricing
goo.gl/2oB6tF

Amazon
DE：amazon.de/dp/B07F8QJG5N
UK：amazon.co.uk/dp/B07F8QJG5N
CA: amzn.to/2BpLxqV
NOTE:- As an Amazon Associate I earn from qualifying purchases but there is no additional cost to you.

The model I reviewed did not include VESA mounting holes but now the model does, also there is a metal backed version the T116C

Magedok T116D 1080 x 1920 10 point touch screen review

Kaiweets Km601 10000 count, first look and detailed test

Arduino Programming - Electrochromic Displays ...PT2

Old laptop Screens on a Raspberry PI... Yes indeed.

Arduino Relay Shield and new lid for the IOT2020

$IOT Friday - Possibly the Cheapest IoT Node on the Planet pt1 The ESP8266 chip on its various SBC modules is rapidly becoming the GOTO for many low cost and low complexity (Relatively) solutions for an IoT Node. With Models like the SONOFF and Slampher from ITead Studio, the ESP01, ESP 12 and many other derivatives, all for well under 5$ and some close to 2$ there hard to beat. The Itead Studio parts come complete with power supply, Relay and a cloud service and Smart App. But where is the fun in just buying one and using a remote cloud service. We will go through re-programming the (ANY) ESP8266 modules with the code a friend of mine created Peter Scargill. http://tech.scargill.net/. Pete has been working with these modules for a long time and has a new set of BIN files with everything including the kitchen sink in them. check out the word doc detailing the configuration here :- https://bitbucket.org/scargill/esp-mqtt-dev/src/fe47daab214fcae49d88802f505430f8d0e5775a/Hackitt-and-Bodgitt-ESP.doc?at=master This is a 32 Bit cpu with built in WIFI, ADC, GPIO, Interrupts, SPI, I2C etc. In most applications where a developer may be tempted to use an Arduino, Launchpad or even a Raspberry PI, this little unit can do the job for a fraction of the cost. You have a choice of IDEs, including the Arduino Wiring IDE, Visual Studio, Eclipse or if you have the BIN files (As we will do in this video), a simple FLASH programmer) So with all Pete has included in this code base there is no need for me to write my own to setup my home automation system (I will show you in later videos). To complete the setup you will need at least a master control using MQTT and Node Red (If you want to minimize your coding effort). This can easily run on any Raspberry pi as a headless SBC and even on lesser powered Linux machines or alternately a Beaglebone Black. or pretty much any Linux system sporting Node Red and MQTT. You can also use Eclipse , IBM, Mosquitto MQTT Internet based services if you want as an alternative. The purpose here is to set it up at home and then allow only what you want out onto the internet. Petes setup script for the Raspberry PI can be found here :-https://bitbucket.org/snippets/scargill/KqgAe/latest-script-june-2016-read-the-comments bin files here http://www.scargill.net/rboot.bin and http://www.scargill.net/romx.bin His text based post detailing all this in his words http://tech.scargill.net/blowing-the-home-control-2016-code/ http://tech.scargill.net/slampher-unfolded/ Source code for those so inclined https://bitbucket.org/scargill/esp-mqtt-dev SONOFF Modules https://www.itead.cc/smart-home.html sonoff info https://www.itead.cc/blog/sonoff-esp8266-reprogramming-part-1-control-mains-from-anywhere$

32Bit PLCs from Barth Elektronik with Arduino Support - Part 2 of 2

Vankyo Matrixpad S10 for Home Automation ?

BLDC Fans and How to tame them without blowing up your controller pt1

Banggood Mailbag - CNC Spindle, Laser Glasses, MPG and more