Uploaded February 2021 | Updated September 2026, 2 hours ago
In this video, I make an Industrial Style Double Coat Hook, using a rebar rod to give it the real industrial decor look. It was a good welding project for me. I did not heat the steel for bending I just used two short bits of pipe that slid over the rebar to get the leverage for the bend.
The steel plate is 3mm thick, 160mm long, and 75mm wide.
The Rebar is a 13mm rebar
The main tools used were a MIG welder, an angle grinder, and a Drill.
I am making a double coat hook to screw to the wall with 4 screws, and then we can hang our clothes on the hooks.
SPANISH, Estoy haciendo un perchero doble para atornillar a la pared con 4 tornillos, y luego podemos colgar nuestra ropa en los ganchos.
PORTUGUESE, Estou fazendo um gancho duplo para aparafusar na parede com 4 parafusos, e então podemos pendurar nossas roupas nos ganchos.
RUSSIAN, Я делаю двойной крючок для одежды, который прикручиваю к стене с помощью 4 шурупов, а затем мы можем вешать нашу одежду на крючки.
The Brand of the Drill bits and cutting/flap discs is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: https://alphatools.com.au
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely. I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
In this video, I make an Industrial Style Double Coat Hook, using a rebar rod to give it the real industrial decor look. It was a good welding project for me. I did not heat the steel for bending I just used two short bits of pipe that slid over the rebar to get the leverage for the bend.
The steel plate is 3mm thick, 160mm long, and 75mm wide.
The Rebar is a 13mm rebar
The main tools used were a MIG welder, an angle grinder, and a Drill.
I am making a double coat hook to screw to the wall with 4 screws, and then we can hang our clothes on the hooks.
SPANISH, Estoy haciendo un perchero doble para atornillar a la pared con 4 tornillos, y luego podemos colgar nuestra ropa en los ganchos.
PORTUGUESE, Estou fazendo um gancho duplo para aparafusar na parede com 4 parafusos, e então podemos pendurar nossas roupas nos ganchos.
RUSSIAN, Я делаю двойной крючок для одежды, который прикручиваю к стене с помощью 4 шурупов, а затем мы можем вешать нашу одежду на крючки.
The Brand of the Drill bits and cutting/flap discs is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: https://alphatools.com.au
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely. I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
