Uploaded November 2017 | Updated November 2026, 1 day ago
FRESH APPAREL AND MERCHANDISE can be found in the HEMISTORE: teespring.com/stores/hemistore
A week and a half ago I visited Amain Hobbies in Chico, California. They have a huge store with an indoor crawler course and an insane assortment in hobby products. I decided to pick up a few parts to address the most important drawbacks that I noticed initially in taking a look at the new HPI Venture.
The most important upgrade you can get for your HPI Venture is without a doubt the steering servo. I decided to go with a ProTek RC 370 TBL Black Label waterproof servo. It packs some insane specs and is a crawler specific servo.
amainhobbies.com/protek-rc-370tbl-black-label-waterproof-high-torque-brushless-crawler-servo-ptk-370tbl/p532334
For weight distributing reasons, I went for a ProTek RC 3S 3600 mAh LIHV battery. This is a new generation of silicon graphene batteries, that holds a charge longer than any conventional LiPo battery. Compact in size, without having to compromize performance.
amainhobbies.com/protek-rc-3s-100c-silicon-graphene-hv-shorty-lipo-battery-11.4v-3600mah-ptk-5116-17/p662759
I installed a system which I run in most of my crawlers, the Castle Creations Mamba X with in this case a 2850kV Slate 1406 sensored motor. Delivering some incredible control in any condition, it has an 8A BEC ready installed, an aux wire to allow you to adjust your drag brake on the fly through the third of 4th channel on your radio, and unique in this scale, is a fully hybrid system which switches from sensored into sensorless when the motor RPMs allow, so you run efficient and at peak performance at all times, while being waterproof.
amainhobbies.com/castle-creations-mamba-x-waterproof-sensored-brushless-combo-w-slate-1406-motor-cse010-0155-10/p665685
I then continued by installing a dual motor RC4WD Warn Zeon winch. It fits well and looks ace!
amainhobbies.com/rc4wd-1-8-rc4wd-warn-zeon-10-winch-rc4ze0069/p451462
Next up were the wheels and tires. I opted for some gun metal anodized Vanquish Products Roost 1.9 rims, these are machined aluminum and will add even more weight to these already heavy axles.
amainhobbies.com/vanquish-products-method-roost-1.9-beadlock-wheel-2-grey-vps07752/p530904
Next year I want to get a bit more involved in comping. A great tire for this purpose is the Class One PBX A/T, by Pit Bull Tires. The thread on them is extremely scale and they are using the legendary "Alien compound" rubber, meaning they will stick in all conditions and provide the traction you are looking for out on any trail.
amainhobbies.com/pit-bull-tires-pbx-a-t-hardcore-1.9-crawler-tire-w-foam-2-alien-pbtpb9010nk/p612018?v=507612
In the video I forgot to mention the Dirty Richard foams, in a soft compound, which I installed on all corners.
amainhobbies.com/pit-bull-tires-dirty-richard-single-stage-foam-fits-pb9010-soft-pbtdr9010fms/p704715?v=673542
After the unboxing, I have also repainted the HPI Venture to give it a personalized look. I also installed some Pro-Line Racing lightpods in the front. The code HEMISTORM10 gives you a 10% discount on the prolineracing.com website.
Many people will wonder if after such a long delay, the truck is still relevant, if it still has a place in a market which is mostly dominated by trucks like the Axial SCX10, the SCX102, the Vaterra Ascender and more recently the Traxxas TRX4. I dare to say that it has. The HPI Venture has some promising features, a very nice chassis layout and comes very complete right from the factory.
The weight of the axles impresses me right out of the gate. Cast aluminum shock mounts/ link mounts and diff covers make for a center of gravity which sits nice and low. The stock Venture features steel C chassis rails, has a 35T brushed motor up front, a waterproof ESC and receiver and feels well balanced overall, with shocks that are of high quality. You will find an aluminum bodied shock absorber which is fully adjustable and dual rated springs. I'm not to keen on the hard tire compound, or the steering servo, but these are all items that will get switched out in the long run anyway.
In my opinion HPI enters the RC arena after a long hiatus, with a very good looking contender for the Scale Truck market.
hpiracing.com
facebook.com/VentureHPI
Please subscribe, it is FREE!
To check out the Amain Hobbies YouTube channel, visit the following link:
youtube.com/channel/UCy5n8D4U_9_igTsIdhGSV0A
For more information about HemiStorm Products feel free to join us on FaceBook:
facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram:
instagram.com/hemistorm
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link:
hemistorm.com
FRESH APPAREL AND MERCHANDISE can be found in the HEMISTORE: teespring.com/stores/hemistore
A week and a half ago I visited Amain Hobbies in Chico, California. They have a huge store with an indoor crawler course and an insane assortment in hobby products. I decided to pick up a few parts to address the most important drawbacks that I noticed initially in taking a look at the new HPI Venture.
The most important upgrade you can get for your HPI Venture is without a doubt the steering servo. I decided to go with a ProTek RC 370 TBL Black Label waterproof servo. It packs some insane specs and is a crawler specific servo.
amainhobbies.com/protek-rc-370tbl-black-label-waterproof-high-torque-brushless-crawler-servo-ptk-370tbl/p532334
For weight distributing reasons, I went for a ProTek RC 3S 3600 mAh LIHV battery. This is a new generation of silicon graphene batteries, that holds a charge longer than any conventional LiPo battery. Compact in size, without having to compromize performance.
amainhobbies.com/protek-rc-3s-100c-silicon-graphene-hv-shorty-lipo-battery-11.4v-3600mah-ptk-5116-17/p662759
I installed a system which I run in most of my crawlers, the Castle Creations Mamba X with in this case a 2850kV Slate 1406 sensored motor. Delivering some incredible control in any condition, it has an 8A BEC ready installed, an aux wire to allow you to adjust your drag brake on the fly through the third of 4th channel on your radio, and unique in this scale, is a fully hybrid system which switches from sensored into sensorless when the motor RPMs allow, so you run efficient and at peak performance at all times, while being waterproof.
amainhobbies.com/castle-creations-mamba-x-waterproof-sensored-brushless-combo-w-slate-1406-motor-cse010-0155-10/p665685
I then continued by installing a dual motor RC4WD Warn Zeon winch. It fits well and looks ace!
amainhobbies.com/rc4wd-1-8-rc4wd-warn-zeon-10-winch-rc4ze0069/p451462
Next up were the wheels and tires. I opted for some gun metal anodized Vanquish Products Roost 1.9 rims, these are machined aluminum and will add even more weight to these already heavy axles.
amainhobbies.com/vanquish-products-method-roost-1.9-beadlock-wheel-2-grey-vps07752/p530904
Next year I want to get a bit more involved in comping. A great tire for this purpose is the Class One PBX A/T, by Pit Bull Tires. The thread on them is extremely scale and they are using the legendary "Alien compound" rubber, meaning they will stick in all conditions and provide the traction you are looking for out on any trail.
amainhobbies.com/pit-bull-tires-pbx-a-t-hardcore-1.9-crawler-tire-w-foam-2-alien-pbtpb9010nk/p612018?v=507612
In the video I forgot to mention the Dirty Richard foams, in a soft compound, which I installed on all corners.
amainhobbies.com/pit-bull-tires-dirty-richard-single-stage-foam-fits-pb9010-soft-pbtdr9010fms/p704715?v=673542
After the unboxing, I have also repainted the HPI Venture to give it a personalized look. I also installed some Pro-Line Racing lightpods in the front. The code HEMISTORM10 gives you a 10% discount on the prolineracing.com website.
Many people will wonder if after such a long delay, the truck is still relevant, if it still has a place in a market which is mostly dominated by trucks like the Axial SCX10, the SCX102, the Vaterra Ascender and more recently the Traxxas TRX4. I dare to say that it has. The HPI Venture has some promising features, a very nice chassis layout and comes very complete right from the factory.
The weight of the axles impresses me right out of the gate. Cast aluminum shock mounts/ link mounts and diff covers make for a center of gravity which sits nice and low. The stock Venture features steel C chassis rails, has a 35T brushed motor up front, a waterproof ESC and receiver and feels well balanced overall, with shocks that are of high quality. You will find an aluminum bodied shock absorber which is fully adjustable and dual rated springs. I'm not to keen on the hard tire compound, or the steering servo, but these are all items that will get switched out in the long run anyway.
In my opinion HPI enters the RC arena after a long hiatus, with a very good looking contender for the Scale Truck market.
hpiracing.com
facebook.com/VentureHPI
Please subscribe, it is FREE!
To check out the Amain Hobbies YouTube channel, visit the following link:
youtube.com/channel/UCy5n8D4U_9_igTsIdhGSV0A
For more information about HemiStorm Products feel free to join us on FaceBook:
facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram:
instagram.com/hemistorm
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link:
hemistorm.com










![[FURY OFF-ROAD] - POST APOCALYPTIC Axial RR10 Ultraford Bomber
FRESH APPAREL AND MERCHANDISE can be found in the HEMISTORE: https://teespring.com/stores/hemistore
San Francisco, California, right under the towering heights of the Golden Gate Bridge, with in the distance the faint contours of Alcatraz, the most notorious prison in history. If anything makes for a great post apocalyptic backdrop, it is this type of scenery. I took the UltraFord Axial RR10 Bomber for a spin, kick up roosts, clouds of dust, the suspension soaking up the jumps. This Rock Racer never ceases to amaze me with its capabilities and the amount of abuse it takes.
Powered by a Castle Creations Mamba X, combined with a Castle 1406 3800kV Slate Series motor, it has tons of torque and speed, the Vanquish Method rims transferring all the power to the insanely grippy Proline Hyrax 2.2 tires. And of course rocking the classic Proline Ford F100 SCX10 Honcho body.
The Axial Racing RR10 Bomber: http://www.axialracing.com/products/ax90048
The Castle Creations Slate series Combos: http://www.castlecreations.com/en/1-10th-scale/mamba-x-25-2v-wp-esc-and-1406-3800kv-sensored-combo-010-0155-11
The body and tires from Proline Racing: https://www.prolineracing.com
Use the code HEMISTORM10 for a 10% discount on all Proline Racing products.
The Vanquish Method 2.2 rims: http://www.vanquishproducts.com/2-2-method-race-wheels/
Music by Ross Bugden. Hes awesome.
SUBSCRIBE, it is FREE!
For more information about HemiStorm Products feel free to join us on FaceBook:
https://www.facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram:
http://instagram.com/hemistorm
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link:
http://www.hemistorm.com/ [FURY OFF-ROAD] - POST APOCALYPTIC Axial RR10 Ultraford Bomber](https://i.ytimg.com/vi/curF5GcE6Qo/mqdefault.jpg)