How to Replace the Drive Belt on a Snapper Lawn Mower @searspartsdirect
How to Replace the Drive Belt on a Snapper Lawn Mower  @searspartsdirect
Uploaded April 2023 | Updated November 2026, 2 days ago
This #diy video shows how to #replace the rear wheel drive belt on a Snapper lawn #mower .
Save 10% OFF parts -- use promo code YOUTUBE at searspartsdirect.com .

Transcript:
To replace the drive system belt, begin by removing the spark plug wire.
Remove the bag or mulch plug.
Raise the height of cut to its highest position.
Tip the unit onto its side and remove the blade.
Locate and remove the 2 baffle retaining screws near the trailing shield.
Locate and remove the 4 screws that retain the baffle to the deck.
Remove the belt cover retaining screw from just behind the engine.
Carefully remove the baffle and belt guard.
Loosen the 2 drive pulley belt guards and swing them aside.
Carefully remove the belt from the engine pulley.
Unhook the cable spring from the transmission.
Rotate the transmission down.
Remove the belt guard.
Remove and replace the belt at this point.
Reassemble in reverse order.
Upon reassembly, position the belt guards 3/32-inch away from the engine pulley.
If the system appears to be slipping uphill, an adjustment is present near the left, rear wheel.
Simply turn it clockwise to increase cable tension to resolve belt slipping concerns.
How to Replace the Drive Belt on a Snapper Lawn MowerHow to replace eject-and-slide-out refrigerator water filtersHow to fix a built-in wall oven that wont heat #diy #oven #repairMetal Height Adjuster Roller Replacement - Kenmore 665-Series and Whirlpool DishwashersUse and Care Tips: MERV Ratings Explained and Choosing the Right Air Filter for Your HomeHow to replace a flipper mullionSnowblower Wont Start   4 Easy FixesReplacing a Range Oven Control BoardElectric Range - Testing coil surface elements with limiter switchesHow to Start Your Lawn Mower Using Starter FluidTop 5 water filter replacement tipsWiring Schematic Symbols Explained
Sears PartsDirect |

How to Replace the Drive Belt on a Snapper Lawn Mower

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER