Electric Range - Testing coil surface elements with limiter switches @searspartsdirect
Electric Range - Testing coil surface elements with limiter switches  @searspartsdirect
Uploaded January 2020 | Updated November 2026, 3 hours ago
When a coil burner on your range won’t heat, you may be at a loss as to what to do next. On certain Frigidaire, GE and Kenmore ranges, a limiter switch may be the problem. We’ll show you how to test the limiter switch and the element itself in this video.

Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:testing-coil surface-elements-with-limiter-switches

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts. Look up your model to make sure you get the right parts for your range.
Coil surface element
searspartsdirect.com/product/2wvcx6oyhs-0022-628/id-5304516160?sid=soc:youtube:part

Find parts for range at
searspartsdirect.com/category/1234574/range-parts?sid=soc:youtube:rangeparts

Or click here to schedule an appointment with a repair technician.
searshomeservices.com/repair#showall

Transcript:
In 2019, Frigidaire, GE and Kenmore ranges started using coil surface elements with limiter switches that cycle power off and on to lower the risk of fire. If the limiter switch fails, the surface element won't heat. If your range has this type of element and isn’t heating, you can test the limiter switch. Unplug the range to disconnect electrical power. Or shut off the house circuit breakers for the range if the power cord is hard to reach. With the burner cool to the touch, pull it out of the cooktop. Using a multimeter, measure the resistance through these element prongs. The meter should measure between 20 and 40 ohms if the element and its limiter switch are good. Replace the element if the meter measures infinite resistance. If the element wasn’t the problem, then a broken infinite burner switch or bad wire could be keeping the element from heating. Watch our video to see how to diagnose those types of problems.
Electric Range - Testing coil surface elements with limiter switchesHow to Start Your Lawn Mower Using Starter FluidTop 5 water filter replacement tipsWiring Schematic Symbols ExplainedStationary and Adjustable Roller Replacement - Kenmore 665-Series and Whirlpool DishwashersHow to disassemble an Electrolux electric freestanding rangeRange Radiant Surface Element Won’t HeatCleaning Stainless Steel AppliancesTroubleshooting F30 and F31 Error Codes on a RangeRepairing Dishwasher Rack RustHow to Fix Your Dishwasher When it Wont Drain After Installing a New Garbage DisposalRiding Mower Only Moves in Reverse   No Forward Motion
Sears PartsDirect |

Electric Range - Testing coil surface elements with limiter switches

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER