Uploaded May 2022 | Updated November 2026, 3 hours ago
This Sears PartsDirect video shows how to access key parts in an Electrolux EW30 freestanding electric range.
The model number of the Electrolux range in the video is EW30EF65.
Transcript:
Unplug the range before disassembly.
To access the control panel boards, start by taking out these 8 screws securing the upper rear access panel.
Remove the upper rear access panel.
This gives access to the relay board, the two power supply boards, the variable speed board, the power UIB (User Interface Board) board and the electronic controller.
To access a majority of the other components, start by taking out these 8 screws securing the lower rear access panel.
Remove the lower rear access panel.
This gives access to the last board—the oven control relay board.
To remove the convection fan motor and element, start by taking out these 4 screws securing the fan cover in place, inside the oven.
Remove the fan cover.
To remove the convection element, start by taking out these 2 screws. Then, behind the unit, disconnect the wiring to remove the convection element.
To remove the convection fan motor, start by removing the fan blade by taking an open-ended wrench and removing this nut in a counter-clockwise motion. Then remove the 2 screws found underneath the fan blade. Next, take out these 3 screws from the back of the unit. Disconnect the wiring, and the fan motor can then be removed.
To remove the bake element, start by taking these 2 screws securing the oven bottom panel in place.
Remove the oven bottom panel.
Next, take out these 4 screws. Then behind the unit, disconnect the wiring to remove the bake element.
To remove the rack-sensing level assembly, remove these 4 screws.
To remove the broil element, start by taking out these 6 screws. Then behind the unit, disconnect the wiring to remove the broil element.
This Sears PartsDirect video shows how to access key parts in an Electrolux EW30 freestanding electric range.
The model number of the Electrolux range in the video is EW30EF65.
Transcript:
Unplug the range before disassembly.
To access the control panel boards, start by taking out these 8 screws securing the upper rear access panel.
Remove the upper rear access panel.
This gives access to the relay board, the two power supply boards, the variable speed board, the power UIB (User Interface Board) board and the electronic controller.
To access a majority of the other components, start by taking out these 8 screws securing the lower rear access panel.
Remove the lower rear access panel.
This gives access to the last board—the oven control relay board.
To remove the convection fan motor and element, start by taking out these 4 screws securing the fan cover in place, inside the oven.
Remove the fan cover.
To remove the convection element, start by taking out these 2 screws. Then, behind the unit, disconnect the wiring to remove the convection element.
To remove the convection fan motor, start by removing the fan blade by taking an open-ended wrench and removing this nut in a counter-clockwise motion. Then remove the 2 screws found underneath the fan blade. Next, take out these 3 screws from the back of the unit. Disconnect the wiring, and the fan motor can then be removed.
To remove the bake element, start by taking these 2 screws securing the oven bottom panel in place.
Remove the oven bottom panel.
Next, take out these 4 screws. Then behind the unit, disconnect the wiring to remove the bake element.
To remove the rack-sensing level assembly, remove these 4 screws.
To remove the broil element, start by taking out these 6 screws. Then behind the unit, disconnect the wiring to remove the broil element.










