Replacing a Range Oven Control Board @searspartsdirect
Replacing a Range Oven Control Board  @searspartsdirect
Uploaded May 2018 | Updated November 2026, 3 hours ago
This video from Sears PartsDirect shows how to replace an oven control board on a range. The oven control board controls the bake and broil elements, and houses the digital display. If the control board isn't sending power to the heating elements, or if the display isn't working, replace the board using a manufacturer-approved part.

Visit us at:
https://www.searspartsdirect.com?sid=soc:youtube:replacing-a-range-oven-control-board

Or call 1-800-437-1673 to speak with a parts specialist.

The video includes these parts and tools. Look up your model to make sure you get the right parts for your range.
Oven control board
searspartsdirect.com/part-number/316630004/0022/628.html?sid=soc:youtube:card-direct-part-link

Find parts for your Range at:
searspartsdirect.com/partsdirect/product-types/Range-Parts?sid=soc:youtube:rangeparts

Or, click here to schedule an appointment with a repair technician.
searshomeservices.com/repair#showall

Transcript:
The first step is to pull out the range and unplug the power cord. Remove the screws from the control panel back shield and pull the shield off the range. Take a picture of the wires attached to the control board so you can attach them to the new board later. Disconnect all of the wires from the oven control board. Remove the mounting screws and pull the oven control board out of the control panel. If the overlay on your existing oven control board is in good shape, use a putty knife to carefully pry off the existing overlay. Attach the overlay to the new control board—the adhesive residue on the back of the overlay should be enough. Or install a new overlay if you purchased one. Position the electronic oven control board and reinstall the mounting screws. Carefully connect all the wires to the new oven control board. Place the control panel back shield on the back of the control console and fasten it with the mounting screws. Plug the power cord into the outlet. Carefully slide the range into position, ensuring that the rear leveling foot fully connects with the anti-tip bracket.
Replacing a Range Oven Control BoardElectric Range - Testing coil surface elements with limiter switchesHow to Start Your Lawn Mower Using Starter FluidTop 5 water filter replacement tipsWiring Schematic Symbols ExplainedStationary and Adjustable Roller Replacement - Kenmore 665-Series and Whirlpool DishwashersHow to disassemble an Electrolux electric freestanding rangeRange Radiant Surface Element Won’t HeatCleaning Stainless Steel AppliancesTroubleshooting F30 and F31 Error Codes on a RangeRepairing Dishwasher Rack RustHow to Fix Your Dishwasher When it Wont Drain After Installing a New Garbage Disposal
Sears PartsDirect |

Replacing a Range Oven Control Board

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER