Uploaded January 2021 | Updated November 2026, 3 hours ago
In this video, we’re going to show you how to replace a flipper mullion on a French-door refrigerator.
The flipper mullion creates an airtight seal between the closed refrigerator doors. A small heater inside the flipper mullion prevents condensation from forming on the mullion. You'll need to replace the flipper mullion if it's damaged or when its heater quits working, causing the flipper mullion to sweat.
Replace the flipper mullion:
1. Shut off the house circuit breaker for the refrigerator or unplug the refrigerator.
2. Using a Phillips screwdriver, remove the screws from the center flipper mullion bracket.
3. Slightly lift the flipper mullion and release it from its top and bottom brackets. Then, unplug the flipper mullion wire harness.
4. Hold the new flipper mullion near the door and connect the flipper mullion wire harness.
5. Attach the flipper mullion to the top and bottom mounting brackets.
6. Align the center bracket mounting holes and install the mounting screws.
7. Plug the power cord into the wall outlet or reset the house circuit breaker for the refrigerator.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
You can find a flipper mullion like the one used in this video on our website.
searspartsdirect.com/product/3bl5wvvonz-0046-795/id-agu73530701?sid=soc:youtube:part
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your refrigerator at
searspartsdirect.com/category/1234589/refrigerator-parts?sid=soc:youtube:refrigerator-parts
In this video, we’re going to show you how to replace a flipper mullion on a French-door refrigerator.
The flipper mullion creates an airtight seal between the closed refrigerator doors. A small heater inside the flipper mullion prevents condensation from forming on the mullion. You'll need to replace the flipper mullion if it's damaged or when its heater quits working, causing the flipper mullion to sweat.
Replace the flipper mullion:
1. Shut off the house circuit breaker for the refrigerator or unplug the refrigerator.
2. Using a Phillips screwdriver, remove the screws from the center flipper mullion bracket.
3. Slightly lift the flipper mullion and release it from its top and bottom brackets. Then, unplug the flipper mullion wire harness.
4. Hold the new flipper mullion near the door and connect the flipper mullion wire harness.
5. Attach the flipper mullion to the top and bottom mounting brackets.
6. Align the center bracket mounting holes and install the mounting screws.
7. Plug the power cord into the wall outlet or reset the house circuit breaker for the refrigerator.
We hope this video helped you out today. Please subscribe to our channel to see more repair tips and tricks.
You can find a flipper mullion like the one used in this video on our website.
searspartsdirect.com/product/3bl5wvvonz-0046-795/id-agu73530701?sid=soc:youtube:part
For more DIY help, visit
searspartsdirect.com/diy/repair-help?sid=soc:youtube:DIY
Find parts for your refrigerator at
searspartsdirect.com/category/1234589/refrigerator-parts?sid=soc:youtube:refrigerator-parts










