Uploaded January 2022 | Updated September 2026, 3 weeks ago
#vanlife #sprinter #flarespace #sponsored
In this episode we walk you through all the steps you'll need to take in order to install your very own flares from Flarespace.
We ended up going with their regular sized flares along with sliding windows on each side.
Check them out here :
flarespace.com/products/sprinter-van-bump-outs?variant=39607142711494
You can start off by painting the flares yourself or taking it to a professional to match your vehicle. We went with the DIY method.
Rustoleum Bed Liner : amzn.to/3f3092N
Then it's time to cut some holes in your van. Make sure to grab the necessary tools and materials before you start!
Framing Square : amzn.to/3F4FUw4
Makita Jigsaw : amzn.to/32X5XIL
Metal Cutting Blades : amzn.to/3zGIAiq
Dewalt Drill : amzn.to/3GaztJa
Drill Bits : amzn.to/3ncVSxY
Metal File : amzn.to/34oKjgD
Sand Paper : amzn.to/3G6dpPX
Primer : amzn.to/33l7esV
Masking Tape : amzn.to/3JXyH4q
Gaff Tape : amzn.to/3q8EFHS
Plastic Drop Cloth : amzn.to/34C9KeX
Caulk Gun : amzn.to/3JSHxk1
Isopropyl Cleaner : amzn.to/3JYZDRI
Mineral Spirits : amzn.to/3q6vaJo
Safety Glasses : amzn.to/3HLyT52
Ear Muffs : amzn.to/3zGnn86
Work Gloves : amzn.to/3zIFyKI
The next steps are straight forward. Mark your cut lines, drill several entry holes for your jigsaw blade, and start cutting. It's good to have a helping hand during this process.
Once you have your openings, make sure to go back through, file down your edges, cover them with a primer, and properly prep your van and flares for sealant.
You can then apply your sealant, pop your flares in place, and tape them down. Allow for 30 hours of cure time before moving your vehicle!
Finally it's time to reinforce your seems with more sealant and install your windows.
Give your flares a water test and if you don't find any leaks, you're good to go!
Bonus points to whoever can count how many times I say "and with that" during this video.
If you have any questions make sure to shoot me an email at dogcatmanvan@gmail.com or leave a comment!
You can also support the channel by becoming a Patreon member!
patreon.com/user?u=27667694
Oh yeah, we have some shirts, stickers, and air fresheners available on our shop page here:
dogcatmanvan.myshopify.com
Follow us on instagram @dogcatmanvan
00:00 Intro
00:12 Why and What Are Flares?
02:09 Test and Paint
04:12 Supplies and Prep
05:50 Cutting Holes
08:59 Cleaning Your Edges
11:28 Sealant Prep and Application
15:01 Cure and Extra Sealant
17:05 Window Install
18:53 Water Test and Conclusion
#vanlife #sprinter #flarespace #sponsored
In this episode we walk you through all the steps you'll need to take in order to install your very own flares from Flarespace.
We ended up going with their regular sized flares along with sliding windows on each side.
Check them out here :
flarespace.com/products/sprinter-van-bump-outs?variant=39607142711494
You can start off by painting the flares yourself or taking it to a professional to match your vehicle. We went with the DIY method.
Rustoleum Bed Liner : amzn.to/3f3092N
Then it's time to cut some holes in your van. Make sure to grab the necessary tools and materials before you start!
Framing Square : amzn.to/3F4FUw4
Makita Jigsaw : amzn.to/32X5XIL
Metal Cutting Blades : amzn.to/3zGIAiq
Dewalt Drill : amzn.to/3GaztJa
Drill Bits : amzn.to/3ncVSxY
Metal File : amzn.to/34oKjgD
Sand Paper : amzn.to/3G6dpPX
Primer : amzn.to/33l7esV
Masking Tape : amzn.to/3JXyH4q
Gaff Tape : amzn.to/3q8EFHS
Plastic Drop Cloth : amzn.to/34C9KeX
Caulk Gun : amzn.to/3JSHxk1
Isopropyl Cleaner : amzn.to/3JYZDRI
Mineral Spirits : amzn.to/3q6vaJo
Safety Glasses : amzn.to/3HLyT52
Ear Muffs : amzn.to/3zGnn86
Work Gloves : amzn.to/3zIFyKI
The next steps are straight forward. Mark your cut lines, drill several entry holes for your jigsaw blade, and start cutting. It's good to have a helping hand during this process.
Once you have your openings, make sure to go back through, file down your edges, cover them with a primer, and properly prep your van and flares for sealant.
You can then apply your sealant, pop your flares in place, and tape them down. Allow for 30 hours of cure time before moving your vehicle!
Finally it's time to reinforce your seems with more sealant and install your windows.
Give your flares a water test and if you don't find any leaks, you're good to go!
Bonus points to whoever can count how many times I say "and with that" during this video.
If you have any questions make sure to shoot me an email at dogcatmanvan@gmail.com or leave a comment!
You can also support the channel by becoming a Patreon member!
patreon.com/user?u=27667694
Oh yeah, we have some shirts, stickers, and air fresheners available on our shop page here:
dogcatmanvan.myshopify.com
Follow us on instagram @dogcatmanvan
00:00 Intro
00:12 Why and What Are Flares?
02:09 Test and Paint
04:12 Supplies and Prep
05:50 Cutting Holes
08:59 Cleaning Your Edges
11:28 Sealant Prep and Application
15:01 Cure and Extra Sealant
17:05 Window Install
18:53 Water Test and Conclusion
