Uploaded July 2022 | Updated September 2026, 1 week ago

---

✅Get our courses at: cechaflo.com
------------------------------------------------------------------------------------------------------------
This time I want to share a tip on how to hold down a velcro strip to a foam base by using the regular upholstery yellow glue.
The hook side strip should be glued down to the foam material.
To get the best adherence a piece of synthetic mesh should be sewn down on the reverse side of velcro material (hook side velcro).
By using a brush a dense coat of yellow glue should be spreaded over the mesh letting it penetrate through the mesh to the wrong side of velcro too.
This first coat of glue should thoroughly dry to apply a second coat.
The same process is done on the foam area where the velcro (mesh side) will be glued down.
The mesh helps a lot to gather a good amount of glue that after it is dry it will grasp very hard to the foam area. Besides the velcro fasteners will remain flexible because of the yellow glue.
I dare to say the adhesion is very resistant.
I hope you enjoy this video and find it useful!

Cesar