How to flash INAV firmware on F722/F405? @Radiolink_official
How to flash INAV firmware on F722/F405?  @Radiolink_official
Uploaded June 2025 | Updated November 2026, 5 days ago
How to flash INAV firmware on F722/F405?
Take F722 as an example.
Prepare a Type-C cable with data transmission function.
Open ‘INAV Con’figurator. The current version is V8.0.1. If the version of your INAV Configurator is below V8.0.1, please update it to the latest version. Because if the version of the configurator is too old, there may be some problems when you flash the latest firmware.
When the configurator version is too low, it will pop out a note to download and update it. Click download new app, it will jump to website. You can download the latest INAV Configurator here. Choose and suitable one according to your computer system.
Now let’s flash INAV firmware.
Click Firmware Flasher.
There are two methods to flash INAV firmware. One is to flash by by loading local firmware. The other one is to flash by loading online firmware.
(RadioLink official website: radiolink.com/)
For flashing by by loading local firmware, you just need to enter RadioLink official website.
FC system--F722--Firmware--INAV firmware. You can click and download the firmware here.
Then click Load firmware local here, and then click Flash Firmware to flash it.
This methods is simple. Then I’m going to introduce how to load by loading online firmware.
There is a DFU button next to the Type-C port of F722.
Long press the DFU button. At the same time, connect F722 to the computer with the Type-C cable. Betaflight Configurator will display the DFU mode
Choose a Board, and select RadioLinkF722.
Choose the latest firmware firmware version for RadioLink722.
Click Firmware Online on the bottom. Wait. It is downloaded.
Click Flash firmware. Wait.
Programming successful here means firmware flashing is successful.
Unplug the USB cable. And connect it again.
Select COM port. Connect. Select the type of the aircraft. (Select it based on your model types.)
Receiver wizard--we select SBUS protocol (Select receiver protocol according to the protocol of your receiver. your receiver type. )
Next. It is rebooting. Now it is connected.
We can see 722 is recognized.
The icon of gyroscope, accelerometer, barometer and DataFlash are displayed on the top.

For more details of RadioLink F722, please refer to the link:
radiolink.com/f722

If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn

#flightcontroller #betaflight #radiolink
How to flash INAV firmware on F722/F405?How to Set T16D/T12D to Control D460?Setup and Connect Walksnail Digital FPV System to crossflight/Mini Pix/PIXHAWKRadioLink F722 Flight Controller Automation Software TestingT16D/T8FB Trainer Function with Wireless Trainer CableThrottle Hold Function of T8S/T8FB TransmitterBinding & Working Modes of R12FHow to Replace the Joystick and Calibrate the Joystick of T8S Transmitter?Setup and Connect DJI Digital FPV System to crossflight/Mini Pix/PIXHAWKSet CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of HelicopterHow to Supply Power to the Receiver Without Using the ESC?🎖️I came, I saw, I conquered.#radiolink #rccar #rollershot #carlove #RC
RadioLink |

How to flash INAV firmware on F722/F405?

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER