Uploaded November 2025 | Updated November 2026, 13 hours ago
High sensitivity high impedance headphones for crystal sets and other electronics uses seem to be difficult to source. There are a variety of suggestions around this issue on social media, so here's my suggestion. I convert a set of ear defenders into a suitable set of earphones that might be applicable. I use earphones frequently while checking circuits for function and my upload might be of use to someone without a piece of useful equipment like this. Telephone transducers are used here, from scrap telephones. The suggestion here isn't high impedance but probably will be high sensitivity. I hope it helps someone, especially if you're into building crystal sets. The impedance can be increase by application of an LT44 driver transformer costing about £4, UK price from eBay. More recently, I connected a jack plug and plugged these 'phones into an electric guitar, and there's enough sensitivity that the the transducers were able to respond so that it was heard quite clearly, even though the DC resistance is only about 45 ohms.
High sensitivity high impedance headphones for crystal sets and other electronics uses seem to be difficult to source. There are a variety of suggestions around this issue on social media, so here's my suggestion. I convert a set of ear defenders into a suitable set of earphones that might be applicable. I use earphones frequently while checking circuits for function and my upload might be of use to someone without a piece of useful equipment like this. Telephone transducers are used here, from scrap telephones. The suggestion here isn't high impedance but probably will be high sensitivity. I hope it helps someone, especially if you're into building crystal sets. The impedance can be increase by application of an LT44 driver transformer costing about £4, UK price from eBay. More recently, I connected a jack plug and plugged these 'phones into an electric guitar, and there's enough sensitivity that the the transducers were able to respond so that it was heard quite clearly, even though the DC resistance is only about 45 ohms.










