![Geeetech Prusa I3 pro B 3D Printer DIY kit assembly [time laps & photo] @TinC33](https://i.ytimg.com/vi/Se3MyJbPuiM/maxresdefault.jpg)
Uploaded January 2017 | Updated September 2026, 2 weeks ago
Time laps and photo of building 3D printer Acrylic Geeetech Prusa I3 pro B 3D Printer DIY kit.
I bought it on ebay for about $200
For wiring (connection) the elctronics (gt2560 board) watch this video:
youtube.com/watch?v=sqQI_-4UNp0
Thanks for watching.
Music:
The Only Girl - Silent Partner
Santo Rico - Twin Musicom
Payday - Silent Partner
Skladba Santo Rico izvajalca Twin Musicom je licencirana z licenco Creative Commons Attribution (creativecommons.org/licenses/by/4.0/)
Izvajalec: twinmusicom.org
Time laps and photo of building 3D printer Acrylic Geeetech Prusa I3 pro B 3D Printer DIY kit.
I bought it on ebay for about $200
For wiring (connection) the elctronics (gt2560 board) watch this video:
youtube.com/watch?v=sqQI_-4UNp0
Thanks for watching.
Music:
The Only Girl - Silent Partner
Santo Rico - Twin Musicom
Payday - Silent Partner
Skladba Santo Rico izvajalca Twin Musicom je licencirana z licenco Creative Commons Attribution (creativecommons.org/licenses/by/4.0/)
Izvajalec: twinmusicom.org
![Geeetech Prusa I3 pro B 3D Printer DIY kit assembly [time laps & photo]](https://i.ytimg.com/vi/Se3MyJbPuiM/mqdefault.jpg "Geeetech Prusa I3 pro B 3D Printer DIY kit assembly [time laps & photo]
Time laps and photo of building 3D printer Acrylic Geeetech Prusa I3 pro B 3D Printer DIY kit.
I bought it on ebay for about $200
For wiring (connection) the elctronics (gt2560 board) watch this video:
https://www.youtube.com/watch?v=sqQI 4UNp0
Thanks for watching.
Music:
The Only Girl - Silent Partner
Santo Rico - Twin Musicom
Payday - Silent Partner
Skladba Santo Rico izvajalca Twin Musicom je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Izvajalec: http://www.twinmusicom.org/")
![Gweike G2 20W Fiber Laser Engraver + addons [Unbox/Review/Test] Metal engraving /alu/brass/plastick](https://i.ytimg.com/vi/TAxZWqb2yn0/mqdefault.jpg "Gweike G2 20W Fiber Laser Engraver + addons [Unbox/Review/Test] Metal engraving /alu/brass/plastick
Hy There,
In this video ill review another laser engraver wich is deffinitely a next level tool.
Its Gweike G2 fiber laser, those kind of lasers are on market for quite a long time but their price was over $5-7k just a few years ago but gweike bring to us powerfull, extremely fast and precize fiber laser for amazing price, compare to some better diode or co2 laser machine.
For more details, price and order check here:
https://shareasale.com/r.cfm?b=2103006&u=2689002&m=128802&urllink=&afftrack=
https://www.gweikecloud.com/?ref=spswancv
Free shipping from US/CA/EU/UK/AU
Discount coupon:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
I forgot to tell, this laser also work with well known lightburn software, but Glaser softwer offer us everything we need and a lot more, but there is still option to use constantly developed lightburn software.
This is so amazing machine because it work on many usefull materialls, like all kind of metals, inox, aluminium, brass, copper, plastic, leather, ceramic, tiles, and much more.
beside of its super power this laser engraver is also unbealivable fast, we can actually miss engraving process when blink with eye.
I see lot of potential in that machine for some small buisness, i already make many engraves on my tools and home, but i afraid soon will be marked every object in my house :)
0:33 unboxing
1:26 review
5:10 assembling
6:27 software
8:48 first test
9:36 dxf engrave
10:29 photo engrave
11:55 colour engrave on inox
12:50 text engrave
14:15 speed test
16:45 materialls test
19:59 deep engrave and cutting
21:08 accessories (rottary chuck, rottary rollers and protective shield)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
dell xps 13 (screen recording)
Music is from: Epidemic sound:
1:ES_River Below - FLYIN
2:ES_Amazonas - FLYIN
3:ES_Aspire - Joel Rampage
4:ES_Baby, So Am I - Young Community
5:ES_Diluted - Aiyo - Kopija
6:ES_Diluted - Aiyo
7:ES_Essence of Love - Ben Elson
8:ES_Hazy Horizon - Aiyo
9:ES_Hogarth - Lupus Nocte
10:ES_Just Struttin - Tigerblood Jewel
11:ES_Natural - oomiee
12:ES_Solid Ground (Instrumental Version) - King Sis
13:ES_A New Kind - Toby Tranter")
![$200 Mill DRO 3 axis Digital Readout from banggood [Unboxing Instalation Review]](https://i.ytimg.com/vi/TIeuhHDJXwI/mqdefault.jpg "$200 Mill DRO 3 axis Digital Readout from banggood [Unboxing Instalation Review]
Hy There,
In this video i will mount new DRO on my mill. The old one work good, but they got too slow refresh time to work normal.
That one is next level of DRO its much faster, precisier and also offer us many other function, wich can be seen into video.
You can buy these items here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
https://www.banggood.com/custlink/GDDvelDz9C
Extra 15% OFF Coupon Lathe Tool code: BGAA357 discount: 15%off
coupon code: BGAA357 discount :15%off expire date: 29.02
Mounting of old Igaging dro:
https://www.youtube.com/watch?v=ldq5VXNAcio&t
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music:
Dark Versus Light - Alternative Metal - Royalty Free Music
https://www.youtube.com/watch?v=uxD88mxMDQc&list=PLCA9A9B18BE3342D8
More about DRO:
Description:
2/3 Axis Grating CNC Milling Digital Readout Display / 50-1000mm Electronic Linear Scale Lathe Tool
Note: The item just includes 1pcs item which you select.
(JCS900-2AE/JCS900-3AE Readout/50-1000mm Linear Scale)
Specification:
-Axis Digital Readout(2 Axis/3 Axis)
1.Measuring travel: 0-3020mm
2.Accuracy class: ± 1um
3.Measurement standards: engraved glass grating
4.Operating voltage: 5V ± 5% DC
5.Working speed: ≤1m / S (1um)
6.Acceleration: ≤ 60m / s²
7.Reference Operating Humidity: ≤ 90RH
8.Grating pitch: 20um (0.020mm)
9.Measurement procedure: Incremental
10.Signal mode: TTL
11.Circuit characteristics: NPN
12.Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm
13.Scanning frequency: ≤28kHz
14.Anti-vibration: 50Hz-2KHz, ≤ 180m / s ²
15.Impact: 16ms, ≤ 600m / s ²
16.Displacement frictional resistance: ≤ 5N
17.Protection class: IP53 / IP64
18.Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, ≤ 100M, can be connected to install the block)
Note: The above parameters are measured in the ideal environment. There may be some differences in practical application.
-TTL Linear Scale(50-1000mm)
1.Physical length is differnt from the travel length 50/100,150,200,250,300,350,400,450,500, 550,600,650,700,750,800,850,900,950,1000mm 5um.
2.High Precision linear scale
3.Resolution: 5um (0.005mm) 0.0002”
4.Signal: TTL square
5.Grating pitch: 0.02mm (50LP/min)
6.Accuracy: ±0.005 mm or 0.0002 (at 20 deg C)
7.Reference marks at interval of 50mm
8.Response Speed: 60m/min or 40ins/sec
Note: Buyers may choose any scale measuring length under 1000mm at this price.In fact,The scale can be made from 0-3000mm.Scale length above refers to the real travel of the linear scale. Actual physical length is 141mm longer than travel. One inch equuals to 25.4mm.
Features:
-The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. -The repeatability of the measurement is more stable.
-The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine.
-Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant.
-Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance.
-Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life.
-The sensor uses a glass precision metrology grating as the measurement reference.
-Multi-function, easy to operate, reliable and durable, so that the necessary processing of mechanical products.
Package Included:
Note: The item just includes 1pcs item which you select.
(JCS900-2AE/JCS900-3AE Readout/50-1000mm Linear Scale)
-(Axis digital readout including 1 x Axis digital readout,1 x set of brackets,1 x cable,1 x user manual)
-TTL linear scale includes 1 x linear scale,1 x L plate,1 x bracket,1 x bag of screw)")
![How to repair tv remote control [non working buttons] diy 10 min fix](https://i.ytimg.com/vi/TkAVMjSmJiA/mqdefault.jpg "How to repair tv remote control [non working buttons] diy 10 min fix
Hy There,
In this video ill show you how easy is to repair non working buttons on tv or any other remote controll.
The main problem is dirt on button pads, i just clean them with alcohol and grease it with contact solution, wich is in big helb on bad electrical contacts.
There are many way to repair remote control, well, thats just one of them.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500 (sel18-200), Sony 6000 (sel30 macro), gopro4
Music is from YouTube audiolibrarry:
Sugar - Vibe Tracks")
![Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]](https://i.ytimg.com/vi/V78k8SAkt9w/mqdefault.jpg "Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]
Hy There,
In this video ill just fix some fails on 25years old Felisatti T83 miter saw.
It got many working hours behind, so after all that time its normally that the bearing wear out, with that opportunity i also fix few other problems, like non working protective saw shield, brakes on motor, and switch for constantly running.
After two afternoon of work saw again work almost like new one ;)
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary:
1: Stomp - Silent Partner
2: Cut It - Silent Partner
3: Mob Battle - Silent Partner
4: Propeller - Silent Partner
5: Pomade - Silent Partner")
![Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]](https://i.ytimg.com/vi/VXFPscxSiWg/mqdefault.jpg "Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]
Hy
I broke an original teflon nozzle throat, when i changed nozzle.
I dont heave another one on stock, so make new one by my self.
But the problem is that i make 4mm hole for the teflon, and filament jam the teflon so fast i cant print a single line.
after a little of thinking i realize that teflon is too hot because it touching the throat, so bore hole to a 4,2mm and voila, never ever jam to me after i do this this.
If you had a minilathe the step is unbeleavable simply and fast, i make a few throat for next time in a few minutes.
Music is from:
http://audionautix.com
Heading West
Feel Good Rock
Thanks guys")
