Uploaded July 2016 | Updated September 2026, 2 weeks ago
unboxing and first test of my new slider, wich soon be motorised
TinC33
|
Genesis B-Slide 2 120 II Video slider unboxing and first test
🔇 TAP TO UNMUTE
![METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal](https://i.ytimg.com/vi/WZNBNnXo4Ao/mqdefault.jpg "METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal
Hy There,
In this video ill try to lower down the speed of bandsaw blade to cut non ferous materials better, because with 700m/min blade lose its sharpeness preatty soon, also if i cut aluminium only.
Motor is 3 phase, running on one phase with using capacitor, so theres no way to controll its speed with other than frequence drive wich cost double as entire saw, plus ill need to lower down the speed a lot that mean from normal 50HZ to about 20HZ, the power of motor at that frequency will be too small to cut harder material.
With adding another belt and two step pulley i even got more power from the motor than before, thats why i choose mechanical conversion.
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary
1: Desert Brawl - Vans in Japan
2: Finland - TrackTribe
3: Riffs For Days - TrackTribe
4: Beach Brazil - TrackTribe
5:Four More Weeks - Vans in Japan")
![HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]](https://i.ytimg.com/vi/XZxj_GJNHA0/mqdefault.jpg "HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]
Hy There,
Today i try my new step drill i got from bangood.
I cant bealive how easy it cut steel, people we talk about $8 worth step drill, not one but 3pcs. I work with other $100 and more worth step drill and dont got so good result. The most important think there is to watch out for sharpening, so always use low rpm and use some lubricant.
Specification:
Material HSS Steel
Finish Titanium
Length 6.7cm/ 7.4cm/10.2cm
4-12mm: 4mm, 6mm, 8mm, 10mm, 12mm
4-20mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 14mm, 16mm, 18mm, 20mm
4-32mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm
Features:
1/4 Hex Shank.
With nylon storage bag.
With the Titanium coated to reduce friction and heat.
Two flute design provides faster, smoother and cleaner cuts.
Perfect for home DIY and general building / engineering use.
Suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc.
Package Included:
3 x Drill Bit
1 x Pouch
You can buy it here:
My affiliate link, if you order from that link youll support me so i can get some BG points
https://www.banggood.com/custlink/vDmDJTvCZY
Coupon Code: 366b66
HSS Titanium Step Cone Drill Bit： https://goo.gl/QiKqUv
Tool & Mechanical Parts Hot & New Up to 60% off: https://goo.gl/k6csM6
S-993A Electric Desoldering Gun： https://goo.gl/iTdb4R
$95.5 for the desoldering gun coupon code: S993A15
Mechanical Parts up to 60%off: https://goo.gl/hmGH1i
12th banggood Anniversary sale main venue: https://goo.gl/GTgjxA
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
Music is from NCS:
Track: RetroVision - Cake [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/n3VO9FnueHI Free Download / Stream: http://ncs.io/CakeYO")
![Tomo Vinković 1518 tripper cylinder + other small modification [milling, turning] hydraulic steering](https://i.ytimg.com/vi/Xl6sAxQCc9M/mqdefault.jpg "Tomo Vinković 1518 tripper cylinder + other small modification [milling, turning] hydraulic steering
Hy There,
In this video i just show you some modifications i make on tractor Tomo Vinković 1018, original steering was very hard, so we mounted hydraulic steering system about two years ago, with that mod, tractor god hydraulic system, so i start thinking why not to add another valve and cylinder for the casson and voila, here it is, beside of that mod i also make some smal improvements, and offcourse couldnt resist some milling and turning timelapses.
Here are some hot blackfriday deal from banggood and gearbest:
http://gbe.st/302mNQy
Amazing plug & play 3Dprinter
http://gbe.st/302mNQz
Banggood Black Friday $1000000 Coupons Dispatching Now
https://www.banggood.com/custlink/mK3dVe2RO9
Black Friday Over 100,000 Pcs Sold
https://www.banggood.com/custlink/DGDh5gMdoo
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Caught by the Waves
2: ES_Gold in Our Pockets (Instrumental Version)
3: ES_Poisoned Blade
4: ES_In a Dark Place (Instrumental Version)")
![Making of: rope tensioner - winch- [for cable cam]](https://i.ytimg.com/vi/Xlyx5z1blD8/mqdefault.jpg "Making of: rope tensioner - winch- [for cable cam]
I make another piece of equipment for a cable cam.
here i make the rope reel:
https://www.youtube.com/watch?v=pP2g4rHv0Uo
But still need something to tension the rope after mount it to location, i make a simply hand winch where you dont need the end of the rope to tension it.
DIY cable cam:
https://www.youtube.com/watch?v=j26w-alAwVw
Music:
Hills Riot")
![INSMA 3000mW USB Laser Engraver under $80 from banggood [unboxing/review/first test]](https://i.ytimg.com/vi/YoYEFVLAzy0/mqdefault.jpg "INSMA 3000mW USB Laser Engraver under $80 from banggood [unboxing/review/first test]
Hy There,
In this video ill show you my new and first laser engraver wich i got from banggood.
You can dowload software here:
Operation instruction video: https://drive.google.com/drive/folders/0B1YOCyE7igQgRWh2OUNOWEhEbWM
Software download: https://drive.google.com/file/d/1V3FMLE5Qec3kU-UlsgyVv_f_ozqvArYl/view
Other laser videos:
https://www.youtube.com/watch?v=kg6Xd4m647Y&t
https://www.youtube.com/watch?v=cMxQ73jwAAY
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
https://www.youtube.com/watch?v=QjyQ0i580LQ
3000mW USB Laser Engraver:
($119.9 coupon price for it: 4cb229 )
https://www.banggood.com/3000mW-USB-Laser-Engraver-Desktop-DIY-Logo-Mark-Printer-Carver-Laser-Engraving-Machine-p-1338648.html?rmmds=search&cur_warehouse=CN&p=ND26071293473201502H&custlinkid=253146
[This is affiliate link (i think) so if you bought item from that link you support me, to get some bonus in banggood]
Laser Safety Goggles: https://bit.ly/2Kev7s5
Angle Grinder: https://bit.ly/2TZObtO (15%off coupon:759ccb)
BlitzWolf® BW-S7 charger: https://bit.ly/2FWsjun
BlitzWolf® BW-MC12 Micro USB: https://bit.ly/2I3nB1j
BlitzWolf® BW-MC13 Micro USB: https://bit.ly/2WQDQ55
Drillpro 60%off: https://bit.ly/2FZ4xhi
Specifications:
Name: Laser Engraver
Model:K3
Material: ABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloy
Color: Black + Gold
Size: 15.2x16.6x14.3cm (6x6.5x5.6)
Voltage: AC 110-220V
Laser power: 3000mW
Carving area: 80x80mm(3.1x3.1)
Carving depth: 1mm
Applicable range: Plane surface
Supporting systems: Windows XP/7/8/10
Supporting image format: JPEG/ JPG/ PNG/ BMP
Features: a laser carving machine for home use,used for carving wood, plastic, leather, etc.
Note:
1.The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.
2.Do not use the laser head to point at human or livestock,do not use laser to point at people’s eyes.
3.Laser has power.skin exposure to laser is strictly prohibited.
4.The caving machine should not be stopped while working,it will cause a damage.
5.This product not suitable for kids under age of 14.
6.Software only support Windows.
7.Do not fall or make any collision to the product.
8.The shell with laser cutting technology,sharp edge,please pick up and down gently to prevent scratches.
9.Metal, glass, crystal and transparent or translucent stuff are can not be engraved.
10.The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
11.You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software.
12.Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time.
Usage:
Operation instruction video: https://drive.google.com/drive/folders/0B1YOCyE7igQgRWh2OUNOWEhEbWM
Software download: https://drive.google.com/file/d/1V3FMLE5Qec3kU-UlsgyVv_f_ozqvArYl/view
Step 1.Insert the USB disk
Step 2: Install the driver.exe
Step 3: Must Copy the English zip to Computer desktop and then unzip it.
Step 4: Connect the engraver to computer
Step 5: Open the scarve-en.exe which is unzip from the English zip
Package includes:
1 x Laser Engraver
1 x Power Cord (US Plug)
1 x USB Disk
1 x USB Cable
2 x Wooden Board
1 x Laser Focusing Paper
1 x Screw Driver
5 x Screws
5 x Screw Caps
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro,]
GoPro 7 Black
Music is from: NSC
Track: Jim Yosef - Imagine [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/6V1BWVNLCkU Free Download / Stream: http://ncs.io/ImagineYO")
