Uploaded May 2018 | Updated September 2026, 2 weeks ago
Hy There,
I reaceived some samples of filament for 3D printer, Azure Film make them in Slovenija (EU)
You can order it here:
azurefilm.com
[i do not reaceived any payment if you order form that link]
I must tell that i'm not some expert in 3D printing but i think that filament is better than other, i got better result with same settings, also first layer stick very well to the bed.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channels:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200), Sony A6000 (sel30macro)
Music is from YouTube audiolibrarry:
Nightingale - Eveningland
Hy There,
I reaceived some samples of filament for 3D printer, Azure Film make them in Slovenija (EU)
You can order it here:
azurefilm.com
[i do not reaceived any payment if you order form that link]
I must tell that i'm not some expert in 3D printing but i think that filament is better than other, i got better result with same settings, also first layer stick very well to the bed.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channels:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200), Sony A6000 (sel30macro)
Music is from YouTube audiolibrarry:
Nightingale - Eveningland
![$200 Mill DRO 3 axis Digital Readout from banggood [Unboxing Instalation Review]](https://i.ytimg.com/vi/TIeuhHDJXwI/mqdefault.jpg "$200 Mill DRO 3 axis Digital Readout from banggood [Unboxing Instalation Review]
Hy There,
In this video i will mount new DRO on my mill. The old one work good, but they got too slow refresh time to work normal.
That one is next level of DRO its much faster, precisier and also offer us many other function, wich can be seen into video.
You can buy these items here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
https://www.banggood.com/custlink/GDDvelDz9C
Extra 15% OFF Coupon Lathe Tool code: BGAA357 discount: 15%off
coupon code: BGAA357 discount :15%off expire date: 29.02
Mounting of old Igaging dro:
https://www.youtube.com/watch?v=ldq5VXNAcio&t
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music:
Dark Versus Light - Alternative Metal - Royalty Free Music
https://www.youtube.com/watch?v=uxD88mxMDQc&list=PLCA9A9B18BE3342D8
More about DRO:
Description:
2/3 Axis Grating CNC Milling Digital Readout Display / 50-1000mm Electronic Linear Scale Lathe Tool
Note: The item just includes 1pcs item which you select.
(JCS900-2AE/JCS900-3AE Readout/50-1000mm Linear Scale)
Specification:
-Axis Digital Readout(2 Axis/3 Axis)
1.Measuring travel: 0-3020mm
2.Accuracy class: ± 1um
3.Measurement standards: engraved glass grating
4.Operating voltage: 5V ± 5% DC
5.Working speed: ≤1m / S (1um)
6.Acceleration: ≤ 60m / s²
7.Reference Operating Humidity: ≤ 90RH
8.Grating pitch: 20um (0.020mm)
9.Measurement procedure: Incremental
10.Signal mode: TTL
11.Circuit characteristics: NPN
12.Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm
13.Scanning frequency: ≤28kHz
14.Anti-vibration: 50Hz-2KHz, ≤ 180m / s ²
15.Impact: 16ms, ≤ 600m / s ²
16.Displacement frictional resistance: ≤ 5N
17.Protection class: IP53 / IP64
18.Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, ≤ 100M, can be connected to install the block)
Note: The above parameters are measured in the ideal environment. There may be some differences in practical application.
-TTL Linear Scale(50-1000mm)
1.Physical length is differnt from the travel length 50/100,150,200,250,300,350,400,450,500, 550,600,650,700,750,800,850,900,950,1000mm 5um.
2.High Precision linear scale
3.Resolution: 5um (0.005mm) 0.0002”
4.Signal: TTL square
5.Grating pitch: 0.02mm (50LP/min)
6.Accuracy: ±0.005 mm or 0.0002 (at 20 deg C)
7.Reference marks at interval of 50mm
8.Response Speed: 60m/min or 40ins/sec
Note: Buyers may choose any scale measuring length under 1000mm at this price.In fact,The scale can be made from 0-3000mm.Scale length above refers to the real travel of the linear scale. Actual physical length is 141mm longer than travel. One inch equuals to 25.4mm.
Features:
-The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. -The repeatability of the measurement is more stable.
-The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine.
-Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant.
-Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance.
-Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life.
-The sensor uses a glass precision metrology grating as the measurement reference.
-Multi-function, easy to operate, reliable and durable, so that the necessary processing of mechanical products.
Package Included:
Note: The item just includes 1pcs item which you select.
(JCS900-2AE/JCS900-3AE Readout/50-1000mm Linear Scale)
-(Axis digital readout including 1 x Axis digital readout,1 x set of brackets,1 x cable,1 x user manual)
-TTL linear scale includes 1 x linear scale,1 x L plate,1 x bracket,1 x bag of screw)")
![How to repair tv remote control [non working buttons] diy 10 min fix](https://i.ytimg.com/vi/TkAVMjSmJiA/mqdefault.jpg "How to repair tv remote control [non working buttons] diy 10 min fix
Hy There,
In this video ill show you how easy is to repair non working buttons on tv or any other remote controll.
The main problem is dirt on button pads, i just clean them with alcohol and grease it with contact solution, wich is in big helb on bad electrical contacts.
There are many way to repair remote control, well, thats just one of them.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500 (sel18-200), Sony 6000 (sel30 macro), gopro4
Music is from YouTube audiolibrarry:
Sugar - Vibe Tracks")
![Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]](https://i.ytimg.com/vi/V78k8SAkt9w/mqdefault.jpg "Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]
Hy There,
In this video ill just fix some fails on 25years old Felisatti T83 miter saw.
It got many working hours behind, so after all that time its normally that the bearing wear out, with that opportunity i also fix few other problems, like non working protective saw shield, brakes on motor, and switch for constantly running.
After two afternoon of work saw again work almost like new one ;)
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary:
1: Stomp - Silent Partner
2: Cut It - Silent Partner
3: Mob Battle - Silent Partner
4: Propeller - Silent Partner
5: Pomade - Silent Partner")
![Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]](https://i.ytimg.com/vi/VXFPscxSiWg/mqdefault.jpg "Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]
Hy
I broke an original teflon nozzle throat, when i changed nozzle.
I dont heave another one on stock, so make new one by my self.
But the problem is that i make 4mm hole for the teflon, and filament jam the teflon so fast i cant print a single line.
after a little of thinking i realize that teflon is too hot because it touching the throat, so bore hole to a 4,2mm and voila, never ever jam to me after i do this this.
If you had a minilathe the step is unbeleavable simply and fast, i make a few throat for next time in a few minutes.
Music is from:
http://audionautix.com
Heading West
Feel Good Rock
Thanks guys")
![METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal](https://i.ytimg.com/vi/WZNBNnXo4Ao/mqdefault.jpg "METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal
Hy There,
In this video ill try to lower down the speed of bandsaw blade to cut non ferous materials better, because with 700m/min blade lose its sharpeness preatty soon, also if i cut aluminium only.
Motor is 3 phase, running on one phase with using capacitor, so theres no way to controll its speed with other than frequence drive wich cost double as entire saw, plus ill need to lower down the speed a lot that mean from normal 50HZ to about 20HZ, the power of motor at that frequency will be too small to cut harder material.
With adding another belt and two step pulley i even got more power from the motor than before, thats why i choose mechanical conversion.
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary
1: Desert Brawl - Vans in Japan
2: Finland - TrackTribe
3: Riffs For Days - TrackTribe
4: Beach Brazil - TrackTribe
5:Four More Weeks - Vans in Japan")
![HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]](https://i.ytimg.com/vi/XZxj_GJNHA0/mqdefault.jpg "HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]
Hy There,
Today i try my new step drill i got from bangood.
I cant bealive how easy it cut steel, people we talk about $8 worth step drill, not one but 3pcs. I work with other $100 and more worth step drill and dont got so good result. The most important think there is to watch out for sharpening, so always use low rpm and use some lubricant.
Specification:
Material HSS Steel
Finish Titanium
Length 6.7cm/ 7.4cm/10.2cm
4-12mm: 4mm, 6mm, 8mm, 10mm, 12mm
4-20mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 14mm, 16mm, 18mm, 20mm
4-32mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm
Features:
1/4 Hex Shank.
With nylon storage bag.
With the Titanium coated to reduce friction and heat.
Two flute design provides faster, smoother and cleaner cuts.
Perfect for home DIY and general building / engineering use.
Suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc.
Package Included:
3 x Drill Bit
1 x Pouch
You can buy it here:
My affiliate link, if you order from that link youll support me so i can get some BG points
https://www.banggood.com/custlink/vDmDJTvCZY
Coupon Code: 366b66
HSS Titanium Step Cone Drill Bit： https://goo.gl/QiKqUv
Tool & Mechanical Parts Hot & New Up to 60% off: https://goo.gl/k6csM6
S-993A Electric Desoldering Gun： https://goo.gl/iTdb4R
$95.5 for the desoldering gun coupon code: S993A15
Mechanical Parts up to 60%off: https://goo.gl/hmGH1i
12th banggood Anniversary sale main venue: https://goo.gl/GTgjxA
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
Music is from NCS:
Track: RetroVision - Cake [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/n3VO9FnueHI Free Download / Stream: http://ncs.io/CakeYO")
