![How to repair tv remote control [non working buttons] diy 10 min fix @TinC33](https://i.ytimg.com/vi/TkAVMjSmJiA/maxresdefault.jpg)
Uploaded April 2018 | Updated September 2026, 2 weeks ago
Hy There,
In this video i'll show you how easy is to repair non working buttons on tv or any other remote controll.
The main problem is dirt on button pads, i just clean them with alcohol and grease it with contact solution, wich is in big helb on bad electrical contacts.
There are many way to repair remote control, well, that's just one of them.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500 (sel18-200), Sony 6000 (sel30 macro), gopro4
Music is from YouTube audiolibrarry:
Sugar - Vibe Tracks
Hy There,
In this video i'll show you how easy is to repair non working buttons on tv or any other remote controll.
The main problem is dirt on button pads, i just clean them with alcohol and grease it with contact solution, wich is in big helb on bad electrical contacts.
There are many way to repair remote control, well, that's just one of them.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500 (sel18-200), Sony 6000 (sel30 macro), gopro4
Music is from YouTube audiolibrarry:
Sugar - Vibe Tracks
![How to repair tv remote control [non working buttons] diy 10 min fix](https://i.ytimg.com/vi/TkAVMjSmJiA/mqdefault.jpg "How to repair tv remote control [non working buttons] diy 10 min fix
Hy There,
In this video ill show you how easy is to repair non working buttons on tv or any other remote controll.
The main problem is dirt on button pads, i just clean them with alcohol and grease it with contact solution, wich is in big helb on bad electrical contacts.
There are many way to repair remote control, well, thats just one of them.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500 (sel18-200), Sony 6000 (sel30 macro), gopro4
Music is from YouTube audiolibrarry:
Sugar - Vibe Tracks")
![Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]](https://i.ytimg.com/vi/V78k8SAkt9w/mqdefault.jpg "Felisatti Miter Saw Repair [replace bearings / fix saw shield / brakes / switch]
Hy There,
In this video ill just fix some fails on 25years old Felisatti T83 miter saw.
It got many working hours behind, so after all that time its normally that the bearing wear out, with that opportunity i also fix few other problems, like non working protective saw shield, brakes on motor, and switch for constantly running.
After two afternoon of work saw again work almost like new one ;)
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary:
1: Stomp - Silent Partner
2: Cut It - Silent Partner
3: Mob Battle - Silent Partner
4: Propeller - Silent Partner
5: Pomade - Silent Partner")
![Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]](https://i.ytimg.com/vi/VXFPscxSiWg/mqdefault.jpg "Making Teflon Nozzle Throat -3D printer- no more jam [using minilathe]
Hy
I broke an original teflon nozzle throat, when i changed nozzle.
I dont heave another one on stock, so make new one by my self.
But the problem is that i make 4mm hole for the teflon, and filament jam the teflon so fast i cant print a single line.
after a little of thinking i realize that teflon is too hot because it touching the throat, so bore hole to a 4,2mm and voila, never ever jam to me after i do this this.
If you had a minilathe the step is unbeleavable simply and fast, i make a few throat for next time in a few minutes.
Music is from:
http://audionautix.com
Heading West
Feel Good Rock
Thanks guys")
![METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal](https://i.ytimg.com/vi/WZNBNnXo4Ao/mqdefault.jpg "METABO bas 260 Bandsaw Modification [lower down the speed] to cut aluminium / brass / metal
Hy There,
In this video ill try to lower down the speed of bandsaw blade to cut non ferous materials better, because with 700m/min blade lose its sharpeness preatty soon, also if i cut aluminium only.
Motor is 3 phase, running on one phase with using capacitor, so theres no way to controll its speed with other than frequence drive wich cost double as entire saw, plus ill need to lower down the speed a lot that mean from normal 50HZ to about 20HZ, the power of motor at that frequency will be too small to cut harder material.
With adding another belt and two step pulley i even got more power from the motor than before, thats why i choose mechanical conversion.
If you want to support me check some hot deals on my affiliates links, you can get some awesome prices and i got a piece of cake ;)
https://www.banggood.com/custlink/Dv3E5GK0sN
http://gbe.st/3028wrA
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube Audiolibrary
1: Desert Brawl - Vans in Japan
2: Finland - TrackTribe
3: Riffs For Days - TrackTribe
4: Beach Brazil - TrackTribe
5:Four More Weeks - Vans in Japan")
![HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]](https://i.ytimg.com/vi/XZxj_GJNHA0/mqdefault.jpg "HSS Titanium Step Cone Drill Bit Hex Shank Hole Cutter from banggood [unbox/review/test]
Hy There,
Today i try my new step drill i got from bangood.
I cant bealive how easy it cut steel, people we talk about $8 worth step drill, not one but 3pcs. I work with other $100 and more worth step drill and dont got so good result. The most important think there is to watch out for sharpening, so always use low rpm and use some lubricant.
Specification:
Material HSS Steel
Finish Titanium
Length 6.7cm/ 7.4cm/10.2cm
4-12mm: 4mm, 6mm, 8mm, 10mm, 12mm
4-20mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 14mm, 16mm, 18mm, 20mm
4-32mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm
Features:
1/4 Hex Shank.
With nylon storage bag.
With the Titanium coated to reduce friction and heat.
Two flute design provides faster, smoother and cleaner cuts.
Perfect for home DIY and general building / engineering use.
Suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc.
Package Included:
3 x Drill Bit
1 x Pouch
You can buy it here:
My affiliate link, if you order from that link youll support me so i can get some BG points
https://www.banggood.com/custlink/vDmDJTvCZY
Coupon Code: 366b66
HSS Titanium Step Cone Drill Bit： https://goo.gl/QiKqUv
Tool & Mechanical Parts Hot & New Up to 60% off: https://goo.gl/k6csM6
S-993A Electric Desoldering Gun： https://goo.gl/iTdb4R
$95.5 for the desoldering gun coupon code: S993A15
Mechanical Parts up to 60%off: https://goo.gl/hmGH1i
12th banggood Anniversary sale main venue: https://goo.gl/GTgjxA
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
Music is from NCS:
Track: RetroVision - Cake [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/n3VO9FnueHI Free Download / Stream: http://ncs.io/CakeYO")
![Tomo Vinković 1518 tripper cylinder + other small modification [milling, turning] hydraulic steering](https://i.ytimg.com/vi/Xl6sAxQCc9M/mqdefault.jpg "Tomo Vinković 1518 tripper cylinder + other small modification [milling, turning] hydraulic steering
Hy There,
In this video i just show you some modifications i make on tractor Tomo Vinković 1018, original steering was very hard, so we mounted hydraulic steering system about two years ago, with that mod, tractor god hydraulic system, so i start thinking why not to add another valve and cylinder for the casson and voila, here it is, beside of that mod i also make some smal improvements, and offcourse couldnt resist some milling and turning timelapses.
Here are some hot blackfriday deal from banggood and gearbest:
http://gbe.st/302mNQy
Amazing plug & play 3Dprinter
http://gbe.st/302mNQz
Banggood Black Friday $1000000 Coupons Dispatching Now
https://www.banggood.com/custlink/mK3dVe2RO9
Black Friday Over 100,000 Pcs Sold
https://www.banggood.com/custlink/DGDh5gMdoo
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Caught by the Waves
2: ES_Gold in Our Pockets (Instrumental Version)
3: ES_Poisoned Blade
4: ES_In a Dark Place (Instrumental Version)")
![Making of: rope tensioner - winch- [for cable cam]](https://i.ytimg.com/vi/Xlyx5z1blD8/mqdefault.jpg "Making of: rope tensioner - winch- [for cable cam]
I make another piece of equipment for a cable cam.
here i make the rope reel:
https://www.youtube.com/watch?v=pP2g4rHv0Uo
But still need something to tension the rope after mount it to location, i make a simply hand winch where you dont need the end of the rope to tension it.
DIY cable cam:
https://www.youtube.com/watch?v=j26w-alAwVw
Music:
Hills Riot")
