Uploaded September 2020 | Updated November 2026, 3 days ago
Left-right composite on stock Falcon v a 50MHz external accelerator with 1MB AltRAM. Frame rate differences only noticeable in the very slowest areas suggesting the writes to (video) memory is the bottleneck. This particular firmware has a ~10% penalty on video writes against stock, evening the comparison.
Left-right composite on stock Falcon v a 50MHz external accelerator with 1MB AltRAM. Frame rate differences only noticeable in the very slowest areas suggesting the writes to (video) memory is the bottleneck. This particular firmware has a ~10% penalty on video writes against stock, evening the comparison.




![Building the DFB1r5 Part 2: Acceleration
Continuing the DFB1r5 build. Can we get it to boot today?
Part two of a build series.
https://github.com/dh219/DFB/wiki
https://twitter.com/thetechnoshed
The DFB1 is an in-development open source booster card for the Atari Falcon 030.
Its intended for the release version to have source files for the hardware, the firmware and the supporting software published under the GPL v2.
0:00 Introduction
5:04 Resistor networks
12:00 LEDs
15:10 Testing with the programmer
22:05 Throughhole components
38:16 Flashing the CPLD
43:46 Testing it in the Falcon
[ Obligatory Gadget16UK mention: https://youtu.be/MPWsPKPZxIc?t=18m48s ] Building the DFB1r5 Part 2: Acceleration](https://i.ytimg.com/vi/MPWsPKPZxIc/mqdefault.jpg)





