Uploaded August 2024 | Updated September 2026, 2 weeks ago
Let's see... if we can see the air movement coming from several ducts so we can come up with even better designs. Help support this channel! patreon.com/Needitmakeit
Wow, this did not go like I had planned, getting smoke into a 3D printer seemed at first like it was going to be a walk in the park. After spending way too much time with the lighting and the settings... and finding a way to create ULTRA FOG, I was able to get something that worked. We also did some unorthodox testing with sparkles in this video, I think it may just be my new go-to for the simplest way to test airflow to visualize it.
Challenge Video Link:
youtu.be/TCD1WldtJvE
All Duct Options (including the Medusa & Template):
makerworld.com/en/models/559282#profileId-478439
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
FOG MACHINE
amzn.to/3M1VG0I (US)
amzn.to/3An8YST (Canada)
LASER POINTER
amzn.to/3SJnb2U (US)
amzn.to/3yCQbm3 (Canada)
DIGITAL SCALE
amzn.to/4eCX0nT - (US)
amzn.to/4eGySkd - (Canada)
NEW MIC
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#tpu
#strong
Let's see... if we can see the air movement coming from several ducts so we can come up with even better designs. Help support this channel! patreon.com/Needitmakeit
Wow, this did not go like I had planned, getting smoke into a 3D printer seemed at first like it was going to be a walk in the park. After spending way too much time with the lighting and the settings... and finding a way to create ULTRA FOG, I was able to get something that worked. We also did some unorthodox testing with sparkles in this video, I think it may just be my new go-to for the simplest way to test airflow to visualize it.
Challenge Video Link:
youtu.be/TCD1WldtJvE
All Duct Options (including the Medusa & Template):
makerworld.com/en/models/559282#profileId-478439
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
FOG MACHINE
amzn.to/3M1VG0I (US)
amzn.to/3An8YST (Canada)
LASER POINTER
amzn.to/3SJnb2U (US)
amzn.to/3yCQbm3 (Canada)
DIGITAL SCALE
amzn.to/4eCX0nT - (US)
amzn.to/4eGySkd - (Canada)
NEW MIC
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#tpu
#strong
