Uploaded April 2025 | Updated November 2026, 1 day ago
Filter Design playlist.
youtube.com/watch?v=OmZyBYe2w6E&list=PLFxhgwM1F4yxBdUMrkTLhTPIeG1I99x3d&index=1
For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.
What is a Microwave Filter? Understanding Its Role in RF & Microwave Systems.
Filter Design Part 1. How to use Scattering S-Parameters (S11, S21, S12, S22) for RF Filters Design.
Filter Design #1. How Lowpass, Highpass, Bandpass & Bandstop Separate Desired & Unwanted Signals.
RF Filter #1. Freq Response of Low Pass, High Pass, Band Pass & Band Stop / Band Reject Explained.
RF Filter #1. How to Design Filter (LPF, HPF, BPF, BSF) by Understand Wave Reflection & Transmission
A microwave filter is a passive electronic component designed to selectively pass or reject specific frequency ranges within the microwave spectrum. It is used to control signal frequencies in RF (Radio Frequency) and microwave systems, ensuring that only desired frequencies are transmitted or received while attenuating unwanted ones.
Key Functions of Microwave Filters:
Pass desired frequencies (e.g., in communication systems).
Block or attenuate unwanted frequencies (interference or noise).
Improve signal quality by reducing out-of-band signals.
Prevent signal distortion in receivers and transmitters.
Low Pass filter allow low-frequency signals without any attenuation (decrease in power) but it rejects any high-frequency signals
Allows high frequency signals to pass without any attenuation in its amplitude & blocks (rejects) any low-frequency signal is called high pass filter.
This type of filter allows a specific band of frequencies & blocks any other frequencies lower or higher than its passband frequencies.
This type of filter attenuates the signal whose frequencies lies in a fixed band of frequencies.
Key Parameters of Filter Design
Types of Filters
Centre Frequency, fo
Cutoff Frequency, fS
Selectivity Factor, Q of BPF
Shape Factor, SF
Insertion Loss, IL
VSWR & Return Loss
Phase Linearity & Group Delay
Filter Impedance
Filter Design playlist.
youtube.com/watch?v=OmZyBYe2w6E&list=PLFxhgwM1F4yxBdUMrkTLhTPIeG1I99x3d&index=1
For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.
What is a Microwave Filter? Understanding Its Role in RF & Microwave Systems.
Filter Design Part 1. How to use Scattering S-Parameters (S11, S21, S12, S22) for RF Filters Design.
Filter Design #1. How Lowpass, Highpass, Bandpass & Bandstop Separate Desired & Unwanted Signals.
RF Filter #1. Freq Response of Low Pass, High Pass, Band Pass & Band Stop / Band Reject Explained.
RF Filter #1. How to Design Filter (LPF, HPF, BPF, BSF) by Understand Wave Reflection & Transmission
A microwave filter is a passive electronic component designed to selectively pass or reject specific frequency ranges within the microwave spectrum. It is used to control signal frequencies in RF (Radio Frequency) and microwave systems, ensuring that only desired frequencies are transmitted or received while attenuating unwanted ones.
Key Functions of Microwave Filters:
Pass desired frequencies (e.g., in communication systems).
Block or attenuate unwanted frequencies (interference or noise).
Improve signal quality by reducing out-of-band signals.
Prevent signal distortion in receivers and transmitters.
Low Pass filter allow low-frequency signals without any attenuation (decrease in power) but it rejects any high-frequency signals
Allows high frequency signals to pass without any attenuation in its amplitude & blocks (rejects) any low-frequency signal is called high pass filter.
This type of filter allows a specific band of frequencies & blocks any other frequencies lower or higher than its passband frequencies.
This type of filter attenuates the signal whose frequencies lies in a fixed band of frequencies.
Key Parameters of Filter Design
Types of Filters
Centre Frequency, fo
Cutoff Frequency, fS
Selectivity Factor, Q of BPF
Shape Factor, SF
Insertion Loss, IL
VSWR & Return Loss
Phase Linearity & Group Delay
Filter Impedance








![Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples
Electrical Principles playlist:
https://www.youtube.com/watch?v=k6thiyNzjpQ&list=PLEvyI-PjnnzI
Ohm’s Law is a fundamental law used in electrical and electronic circuits. It describes the relationship between three important electrical quantities: voltage, current, and resistance. It is one of the basic principles used in DC circuit theory.
Georg Ohm discovered that, at a constant temperature, the current flowing through a fixed resistance is directly proportional to the voltage applied across it. In other words, increasing the voltage increases the current. The current is also inversely proportional to the resistance, meaning that increasing the resistance decreases the current.
This relationship between voltage, current, and resistance forms the basis of Ohm’s Law.
The electrical potential difference, measured in Volts (V). It is the force that pushes the electric charge.
I (Current): The flow of electrical charge, measured in Amperes or Amps (A).
R (Resistance): The opposition to the flow of charge, measured in Ohms (Ω).
To find the Voltage, (V)
[ V = I x R ]⟹V (volts) = I (amps) x R (Ω)
To find the Current, (I)
[ I = V ÷ R ]⟹I (amps) = V (volts) ÷ R (Ω)
To find the Resistance, (R)
[ R = V ÷ I ]⟹R (Ω) = V (volts) ÷ I (amps)
Below is a circuit with a battery and a resistor. The battery is a 12-volt battery, and the resistor has a resistance of 600 ohms. How much current flows through the circuit?
A toaster has a resistance of 10 Ω and draws a current 5 A. What is the voltage across it
A hair dryer is plugged into a 230V outlet and draws a current of 11 A, its resistance is Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples](https://i.ytimg.com/vi/SnY7oLFciug/mqdefault.jpg)

