Uploaded November 2026 | Updated November 2026, 1 day ago
Electrical Principles playlist:
youtube.com/watch?v=k6thiyNzjpQ&list=PLEvyI-PjnnzI
Kirchhoff’s Current Law (KCL)—also known as the Junction Rule or Kirchhoff’s First Law—states that the total electrical current entering any node (junction) in a circuit must equal the total current leaving that node.
Conservation of Charge: Electric charge cannot be created or destroyed at a junction. Whatever charge flows in must flow out.
Easy way to remember
Current IN = Current OUT
Think of water flowing into and out of a pipe junction: the amount entering must equal the amount leaving (assuming no charge accumulates at the junction).
Kirchhoff’s Voltage Law (KVL) or the Loop Rule is his second law that deals with the conservation of energy as the sum of all the voltages around any closed loop in a circuit must be equal to zero.
Similarly to Kirchhoff's current law, the voltage law can be stated as:
It is based on the conservation of energy, meaning electric charges neither gain nor lose net energy as they complete a full loop and return to their starting potential.
Key Rules for Application
Choose a Loop: Pick a closed path that starts and ends at the exact same electrical node.
Select a Direction: Decide whether to trace the loop clockwise or counter-clockwise.
Assign Signs:
Voltage Rises: Moving from a negative (-) to a positive (+) terminal on a source counts as a positive voltage (+V).
Voltage Drops: Moving across a resistor in the direction of the current counts as a negative voltage (-IR).
Sum to Zero: Add all the terms together and set the total to zero.
Electrical Principles playlist:
youtube.com/watch?v=k6thiyNzjpQ&list=PLEvyI-PjnnzI
Kirchhoff’s Current Law (KCL)—also known as the Junction Rule or Kirchhoff’s First Law—states that the total electrical current entering any node (junction) in a circuit must equal the total current leaving that node.
Conservation of Charge: Electric charge cannot be created or destroyed at a junction. Whatever charge flows in must flow out.
Easy way to remember
Current IN = Current OUT
Think of water flowing into and out of a pipe junction: the amount entering must equal the amount leaving (assuming no charge accumulates at the junction).
Kirchhoff’s Voltage Law (KVL) or the Loop Rule is his second law that deals with the conservation of energy as the sum of all the voltages around any closed loop in a circuit must be equal to zero.
Similarly to Kirchhoff's current law, the voltage law can be stated as:
It is based on the conservation of energy, meaning electric charges neither gain nor lose net energy as they complete a full loop and return to their starting potential.
Key Rules for Application
Choose a Loop: Pick a closed path that starts and ends at the exact same electrical node.
Select a Direction: Decide whether to trace the loop clockwise or counter-clockwise.
Assign Signs:
Voltage Rises: Moving from a negative (-) to a positive (+) terminal on a source counts as a positive voltage (+V).
Voltage Drops: Moving across a resistor in the direction of the current counts as a negative voltage (-IR).
Sum to Zero: Add all the terms together and set the total to zero.


![Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples
Electrical Principles playlist:
https://www.youtube.com/watch?v=k6thiyNzjpQ&list=PLEvyI-PjnnzI
Ohm’s Law is a fundamental law used in electrical and electronic circuits. It describes the relationship between three important electrical quantities: voltage, current, and resistance. It is one of the basic principles used in DC circuit theory.
Georg Ohm discovered that, at a constant temperature, the current flowing through a fixed resistance is directly proportional to the voltage applied across it. In other words, increasing the voltage increases the current. The current is also inversely proportional to the resistance, meaning that increasing the resistance decreases the current.
This relationship between voltage, current, and resistance forms the basis of Ohm’s Law.
The electrical potential difference, measured in Volts (V). It is the force that pushes the electric charge.
I (Current): The flow of electrical charge, measured in Amperes or Amps (A).
R (Resistance): The opposition to the flow of charge, measured in Ohms (Ω).
To find the Voltage, (V)
[ V = I x R ]⟹V (volts) = I (amps) x R (Ω)
To find the Current, (I)
[ I = V ÷ R ]⟹I (amps) = V (volts) ÷ R (Ω)
To find the Resistance, (R)
[ R = V ÷ I ]⟹R (Ω) = V (volts) ÷ I (amps)
Below is a circuit with a battery and a resistor. The battery is a 12-volt battery, and the resistor has a resistance of 600 ohms. How much current flows through the circuit?
A toaster has a resistance of 10 Ω and draws a current 5 A. What is the voltage across it
A hair dryer is plugged into a 230V outlet and draws a current of 11 A, its resistance is Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples](https://i.ytimg.com/vi/SnY7oLFciug/mqdefault.jpg)







