Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples @technologiesdiscussion1676
Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples  @technologiesdiscussion1676
Uploaded September 2026 | Updated November 2026, 2 days ago
Electrical Principles playlist:
youtube.com/watch?v=k6thiyNzjpQ&list=PLEvyI-PjnnzI

Ohm’s Law is a fundamental law used in electrical and electronic circuits. It describes the relationship between three important electrical quantities: voltage, current, and resistance. It is one of the basic principles used in DC circuit theory.
Georg Ohm discovered that, at a constant temperature, the current flowing through a fixed resistance is directly proportional to the voltage applied across it. In other words, increasing the voltage increases the current. The current is also inversely proportional to the resistance, meaning that increasing the resistance decreases the current.
This relationship between voltage, current, and resistance forms the basis of Ohm’s Law.

The electrical potential difference, measured in Volts (V). It is the force that pushes the electric charge.
I (Current): The flow of electrical charge, measured in Amperes or Amps (A).
R (Resistance): The opposition to the flow of charge, measured in Ohms (Ω).

To find the Voltage, (V)
[ V = I x R ]⟹V (volts) = I (amps) x R (Ω)
To find the Current, (I)
[ I = V ÷ R ]⟹I (amps) = V (volts) ÷ R (Ω)
To find the Resistance, (R)
[ R = V ÷ I ]⟹R (Ω) = V (volts) ÷ I (amps)

Below is a circuit with a battery and a resistor. The battery is a 12-volt battery, and the resistor has a resistance of 600 ohms. How much current flows through the circuit?

A toaster has a resistance of 10 Ω and draws a current 5 A. What is the voltage across it

A hair dryer is plugged into a 230V outlet and draws a current of 11 A, its resistance is
Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with ExamplesZigBee #1. How This Global Standard Power Smart Applications with Low Cost, Long Battery Life & MoreEMC #20. Wave Impedance vs Characteristic Impedance for EMC & EMI Shielding Calculations ExplainedAntenna Radiation Patterns| Isotropic vs Omnidirectional vs Directional Antennas with ExamplesEMC #21. EMI Shielding: Absorption Vs Reflection. How to Design EMC Shields to Block Interference.Why Digital Took Over: The Simple Difference Between Analog & Digital Signal (and Why Its Better)Antenna #24. Why λ/2 Dipole Ant Length Precision Matters: Resonance, Current Flow & VSWR ExplainedImpedance Matching #1. Why RF Uses Matched & Mismatched Design: Max Power Transfer vs ReflectionWhy AC & DC Power Are Essential: Simple Explanation of How Electricity Moves & Powers Our World.What is BPS? Bits Per Second Explained: Key to Digital Speed & Bandwidth for Digital Communication.Electrical Principles #2. Define Electric Current, Conventional Current, EMF & Potential DifferenceBak Kut Teh SHOWDOWN: Malaysia vs Singapore – Herbal VS Pepper! Which Tastes Better? (Food Wars)
Technologies Discussion |

Electrical Principles #3. How to Calculate (Ohm’s Law) Voltage, Current & Resistance with Examples

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER