Uploaded August 2026 | Updated September 2026, 2 weeks ago
Click for more info and reviews of this Z-TRAK E Track:
etrailer.com/E-Track/Z~TRAK/ZT89FR.html
Check out some similar E Track options:
etrailer.com/dept-pg-E_Track-sf-E_Track_Wheel_Chocks.aspx
etrailer.com
Don’t forget to subscribe!
youtube.com/user/etrailertv
Full transcript: etrailer.com/tv-Demo-Z-TRAK-E-Track-E-Track-Wheel-Chocks-3-Bike-ZT89FR.aspx
Hi everyone. Steve here with etrailer. Today we're taking a look at our Z-Track motor chalk standard bike chocks with extender made for three bikes. So folks, use can let you load three bikes the same way every time. You're going to be able to hold the front wheels where you want them while you secure the bikes. This will attach to your Z-Track that is custom to your vehicle.
So make sure you get that separately if you don't already have it. And the Z-Track again will mount to the front bed of the truck as you see the image. And then you will mount these chocks to that Z-track. And this middle one, you do have an occluded extender and that is there to get this middle one bumped out. So where we have handlebars and handlebars have space, we're not hitting each other when we're loading our bikes, dirt bikes, those kind of things, motorcycles.
And then you're going to have two O-ring tie downs per wheel chalk. And these are made for Z-Track and E-Track. They work for both, but mainly predominantly designed for Z-Track. And then of course you got your tie down holes on all of these chalks along with the Z-track mount in the back. You do have three sets of adjustments so you can make this higher or lower depending on your personal setup and your needs.
And this is all heavy duty steel. It is powder coated so you don't have to worry about rust, corrosion, anything like that. And what's nice about these standard wheel chocks is I can put my bike up inside of here. I can almost probably let it sit there and this is going to hold it in place while I get up and strap everything down. Now if you don't have straps, we carry them separately as well.
I recommend personally kind of crisscrossing your straps, meaning the strap here is probably going to come down an angle over here to one of these Z O-rings and vice versa versus just straight back on the thing, if that makes sense. That way you're holding it tight from both sides. Now these accommodate up to a four inch wide tire and these are 17 inches tall overall. So again folks, this is your set of three. These are the standard wheel chocks with extender. I'm Steve with etrailer. Thanks for watching.
Click for more info and reviews of this Z-TRAK E Track:
etrailer.com/E-Track/Z~TRAK/ZT89FR.html
Check out some similar E Track options:
etrailer.com/dept-pg-E_Track-sf-E_Track_Wheel_Chocks.aspx
etrailer.com
Don’t forget to subscribe!
youtube.com/user/etrailertv
Full transcript: etrailer.com/tv-Demo-Z-TRAK-E-Track-E-Track-Wheel-Chocks-3-Bike-ZT89FR.aspx
Hi everyone. Steve here with etrailer. Today we're taking a look at our Z-Track motor chalk standard bike chocks with extender made for three bikes. So folks, use can let you load three bikes the same way every time. You're going to be able to hold the front wheels where you want them while you secure the bikes. This will attach to your Z-Track that is custom to your vehicle.
So make sure you get that separately if you don't already have it. And the Z-Track again will mount to the front bed of the truck as you see the image. And then you will mount these chocks to that Z-track. And this middle one, you do have an occluded extender and that is there to get this middle one bumped out. So where we have handlebars and handlebars have space, we're not hitting each other when we're loading our bikes, dirt bikes, those kind of things, motorcycles.
And then you're going to have two O-ring tie downs per wheel chalk. And these are made for Z-Track and E-Track. They work for both, but mainly predominantly designed for Z-Track. And then of course you got your tie down holes on all of these chalks along with the Z-track mount in the back. You do have three sets of adjustments so you can make this higher or lower depending on your personal setup and your needs.
And this is all heavy duty steel. It is powder coated so you don't have to worry about rust, corrosion, anything like that. And what's nice about these standard wheel chocks is I can put my bike up inside of here. I can almost probably let it sit there and this is going to hold it in place while I get up and strap everything down. Now if you don't have straps, we carry them separately as well.
I recommend personally kind of crisscrossing your straps, meaning the strap here is probably going to come down an angle over here to one of these Z O-rings and vice versa versus just straight back on the thing, if that makes sense. That way you're holding it tight from both sides. Now these accommodate up to a four inch wide tire and these are 17 inches tall overall. So again folks, this is your set of three. These are the standard wheel chocks with extender. I'm Steve with etrailer. Thanks for watching.
