ESP32 Audio Processing with PCB Artists ES8388 @na5y
ESP32 Audio Processing with PCB Artists ES8388  @na5y
Uploaded August 2021 | Updated November 2026, 1 day ago
I have been looking for an alternative to the pMod I2S board for a while and I came across the PCB Artists ES8388 board
pcbartists.com/products/es8388-module/esp32-es8388-audio-codec-interfacing

I thought I'd buy a couple and share some results. Here is a datasheet for the ES8388 chip the board uses (same codec used by Espressif LyraT):
everest-semi.com/pdf/ES8388%20DS.pdf

Here's the code for the basic example
github.com/thaaraak/ESP32-ES8388

Here's the FIR code (including the es8388 fixes and the PCB artists board code)
github.com/thaaraak/ESP32-IQ

Here's an earlier video I did that describes all the ESP32 DSP FIR code in detail
youtube.com/watch?v=oKbi1XitBvI&t=764s

I Forgot to mention that I have a couple of 4.7k pullup resistors on the boards SDA/SCL connections. I am not sure if they are needed as I have enabled internal pullups on the ESP32 side.

0:00 Intro
0:50 ES8388 board closeup
2:18 ES8388 block diagram
3:25 PCB Artists ES8388 Board pinout and description
5:45 ESP32/ES8388 circuit diagram
7:39 Walkthrough of hardware setup
8:15 Simple sine wave example with varying amplitude (non-ESP ADF)
9:20 Simple sine Code walkthrough
12:45 MCLK code on GPIO 3
15:28 ESP-ADF FIR phase shift example
17:21 ESP-ADF Code - ES8388 changes
18:38 Board specific directory/pins setup for ADF
19:52 sdkconfig setup and wrapup
ESP32 Audio Processing with PCB Artists ES8388QST Wattmeter  - Part 6 Reflected Channel and dbm DisplayMC1496 Modulator and MixerQST Wattmeter -  Part 3 LF398 and first measurementNorcal Sierra - Part 7 Receive Mixer, Ladder Filter and Receiver On the AirQCX Amplifier TroubleshootingESP32 Based SDR Transmitter - Part 4 Transmitter on the AirESP32-A1S Radio on a Board - Part 1Soldering an SMD ElectrolyticQCX Transceiver Part 2  - Power, CW Filter and Audio AmplifierESP32 Based SDR Transmitter - Part 3 BPF, Preamp and fixing some Amp problems70W Amplifier - Using RD16HHF1
NA5Y |

ESP32 Audio Processing with PCB Artists ES8388

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER