Uploaded October 2022 | Updated November 2026, 1 day ago
In this video I create a board for the SDR I previously did in this video:
youtube.com/watch?v=prCrbD4T6I4&t=1s
The github repo containing the kicad files (and a PDF for those without kicad) is here
github.com/thaaraak/Tayloe-Mixer-v3
The QRP-Labs bandpass filter I mentioned is here:
qrp-labs.com/bpfkit.html
Mr Carlsons lab technique for double sided boards
youtube.com/watch?v=au2ba5gWLWk
My Earlier video using "fab in a box"
youtube.com/watch?v=X5O1au3FvRc
0:00 Intro and Board Walkthrough
1:37 Schematic walkthrough (apologies again for the low piched hum)
4:22 Build Order
6:18 Power supply circuitry on the board and tested
8:30 A problem with the RX/TX lines
9:50 RX/TX lines fixed
10:38 ESP32-A1S installed on the board
11:30 First program flashed
13:28 si5351 installed and tested
15:20 Wrap up
In this video I create a board for the SDR I previously did in this video:
youtube.com/watch?v=prCrbD4T6I4&t=1s
The github repo containing the kicad files (and a PDF for those without kicad) is here
github.com/thaaraak/Tayloe-Mixer-v3
The QRP-Labs bandpass filter I mentioned is here:
qrp-labs.com/bpfkit.html
Mr Carlsons lab technique for double sided boards
youtube.com/watch?v=au2ba5gWLWk
My Earlier video using "fab in a box"
youtube.com/watch?v=X5O1au3FvRc
0:00 Intro and Board Walkthrough
1:37 Schematic walkthrough (apologies again for the low piched hum)
4:22 Build Order
6:18 Power supply circuitry on the board and tested
8:30 A problem with the RX/TX lines
9:50 RX/TX lines fixed
10:38 ESP32-A1S installed on the board
11:30 First program flashed
13:28 si5351 installed and tested
15:20 Wrap up










