Uploaded December 2016 | Updated September 2026, 3 weeks ago
A fellow Youtuber has restored an old Elliott 14S metal shaper. I've picked up his motor to refurbish it and also convert it from 400V to 230V. as he does not have 3 phase power in his shop and the motor had no means of an easy swap from star to delta configuration.
In this episode we'll do the rewiring and talk about the correct wiring of the coils.
The motor is believed to be manufactured in or short after 1957.
Please note, Electricity is dangerous, if you are not trained on the subject, don't touch it as it may kill you.
This footage is for entertainment only and by no means an instructional. It most likely shows unsafe practice by today's standards.
(c) 2016
dynoguy.co.uk
A fellow Youtuber has restored an old Elliott 14S metal shaper. I've picked up his motor to refurbish it and also convert it from 400V to 230V. as he does not have 3 phase power in his shop and the motor had no means of an easy swap from star to delta configuration.
In this episode we'll do the rewiring and talk about the correct wiring of the coils.
The motor is believed to be manufactured in or short after 1957.
Please note, Electricity is dangerous, if you are not trained on the subject, don't touch it as it may kill you.
This footage is for entertainment only and by no means an instructional. It most likely shows unsafe practice by today's standards.
(c) 2016
dynoguy.co.uk
