DIY Vine Pole & Plant Stand - The Great Outdoors @YourNewHouse
DIY Vine Pole & Plant Stand - The Great Outdoors  @YourNewHouse
Uploaded June 2020 | Updated September 2026, 2 hours ago
Bit Brace or Brace and Bit: amzn.to/2YwOAti and amzn.to/3dxZnay
Due to requests, I am now including links to products when possible. These links are provided for reference, no company or individual paid to be in this video. Depending on the vendor, a small commission might be paid and would be used to support adding content to this channel.
Amazon Prime free 30 day trial: amzn.to/3g9mwCL
Amazon Tool Deals of the Day: amzn.to/3eUGcsD

More of The Great Outdoors with Joe Sherinski:
youtube.com/playlist?list=PLjTMbsoHW2ejiksPCxa2DTFANK-gz52xN

Plant Stand:
Materials Needed:
- two 3-step stringers (treated lumber)
- four 2x6x4 pieces of treated lumber
- box of 3-inch galvanized wood screws
- plastic screw anchors (if you are attaching your stand to the wall)

Tools Needed:
- rotary hammer (if you are attaching your stand to a concrete or brick wall)
- drill with screwdriver bit
- circular saw (if wood is not pre-cut)
- eye and ear protection


STEPS TO CREATE A PLANT STAND

Step1
Connect your stringers. Using one of the 2x6x4 pieces of lumber, connect the stringers. By turning the stringers upside-down, you can increase height and reduce the width of the shelf.

Step2
Support the shelf. If you are going to connect your shelf to a wall, drill a pilot hole through the back brace and mark the spot on the wall you will need to drill. Next, using a rotary hammer, drill your hole. If you are drilling in stone or mortar, it is a good idea to tap a plastic anchor into the hole before screwing the shelf to the wall. If you are making your shelves free-standing, 2x4s can be used to form supporting legs.

Step3
Connect your shelves. After your frame is erected, you can add your shelves. Be sure to use galvanized screws to insure protection against weather.


Vine Pole:

Materials Needed:
- 4x4 post
- Three 3/4 inch dowel rods
- finial and finial base
-
Tools Needed:
- drill with 3/4 wood bit
- hammer
- step ladder
- eye and ear protection


STEPS TO CREATE A VINE POLE


Step1
Install your finial. Finials come in all shapes and sizes. Choose one that compliments your landscape or one that matches existing fence or deck posts.

Step2
Install your dowel rods. Cut your dowel rods into 1-foot sections. Drill 3/4 inch holes, approximately 12 inches apart, through the post. Tap the dowel rods through the post, until they are even on both sides.

Step3
Plant your vine. All that’s left now is to choose and plant a “twining” style vine at the base of your pole. Honeysuckle is always a good choice.


MORE FROM YOUR NEW HOUSE
Featured videos:
youtube.com/playlist?list=PLjTMbsoHW2eiqktEDbaQunVDuiTidxPxd

Great DIY Projects from Your New House:
youtube.com/playlist?list=PLjTMbsoHW2ejNSy9ywo1mKiGaSXuTsEgE

Quick Tips - easy tips to make your projects (and life) better:
youtube.com/playlist?list=PLjTMbsoHW2eh4zI-dJCevBTEdY5ioSAPQ

Gardening and Landscaping:
youtube.com/playlist?list=PLjTMbsoHW2ejdcWzNkAARBzUQDvT3W1ME

Adventures in Homebuilding - Home info with a smile:
youtube.com/playlist?list=PLjTMbsoHW2ehA9bTrvQ58AHfE_utaBCLc

Choosing and Using Tools with Carmen Ciricillo:
youtube.com/playlist?list=PLjTMbsoHW2eisLdRjyue3eVZT-qjM9B6I

Factory Tours and Product Testing:
youtube.com/playlist?list=PLjTMbsoHW2ej6wLU1NAVlWhcvVWL1ynJQ

Al Carrell - The Super Handyman:
youtube.com/playlist?list=PLjTMbsoHW2ehFhy7mXnyX_pe4v03DrqfS
DIY Vine Pole & Plant Stand - The Great OutdoorsShellac - Quick TipFloor Sanding Mistakes: Refinishing Hardwoods - Fix It UpReplacing an Attic Fan - Do It YourselfHow to Texture a Wall (7 options) Do It YourselfExterior Stone: Renaissance Project House - Part 16Plant Propagation  - The Great OutdoorsEasy Mow Edging: Stop Lawn Maintenance Headaches for Good - The Great OutdoorsPaint Drain - Quick TipsMega Build -16,000 sf - Part 21: Cabinets and StorageDrywall - Hang, Tape and Bed - Do It YourselfInstalling Cabinet Pulls - Quick Tip
Your New House |

DIY Vine Pole & Plant Stand - The Great Outdoors

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER